About Plain Bearings
More
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings stand up to higher temperatures than PTFE and thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 12 mm Shaft Dia. | |||||||||
| 16mm | 15mm | 20mm | 2mm | 140 lbs. @ 120 rpm | 90 lbs. @ 120 rpm | Gold | -400° to 500° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||||
| 16mm | 10mm | 22mm | 3mm | 620 lbs. @ 120 rpm | 1,250 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||||||
| 16mm | 8mm | 23mm | 3mm | 590 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
| 16mm | 12mm | 23mm | 3mm | 890 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
| 16mm | 16mm | 23mm | 3mm | 1,150 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
| 16mm | 20mm | 23mm | 3mm | 1,450 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |