About Plain Bearings
More
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings handle higher operating temperatures than PTFE or thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | ||||||
| 9/16" | 1/2" | 47 lbs. @ 120 rpm | White | -10° to 220° | 000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW and acetal bearings, and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||
| 9/16" | 3/8" | 115 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
| 9/16" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||
| 0.379" | 9/16" | 3/8" | 115 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
| 0.379" | 9/16" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 0000 |
| 0.379" | 9/16" | 3/4" | 235 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 7/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 47 lbs. @ 120 rpm | 30 lbs. @ 120 rpm | White | -20° to 250° | 00000000 | 00000 |