Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Acetal bearings do not warp or swell when exposed to water, so they’re often used in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
| 16mm | 19mm | 39.7mm | 82.6mm | 19.8mm | 19.8mm | 8.7mm | 63.5mm | 145 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 16mm | 19mm | 39.5mm | 82.5mm | 19.5mm | 19.4mm | 8.5mm | 63.5mm | 990 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
| 16mm | 41mm | 82.5mm | 19.5mm | 19.5mm | 6.4mm | 10.5mm | 63.5mm | 145 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
High-Speed Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can. The material is self-lubricating for less wear and longer life in your system. These bearings swivel to compensate for small amounts of shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter | Height | Length | Width | Bearing Width | Flange Thickness | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
PTFE-Filled Acetal Plastic Bearings with Black-Oxide Steel Housing | ||||||||||||
| 16mm | 40mm | 59.8mm | 19.4mm | 17.1mm | 2.3mm | 5.6mm | 30mm | 340 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
High-Speed Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal. They don’t require any additional lubrication. To compensate for minor shaft misalignment, they’re self-aligning. Mount them using their two-bolt flange.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter | Height | Length | Width | Bearing Width | Flange Thickness | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
PTFE Plastic-Filled Acetal Bearings with Aluminum Housing | ||||||||||||
| 16mm | 41.3mm | 82.6mm | 19.8mm | 19.8mm | 6.4mm | 10.3mm | 63.5mm | 340 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 16mm | 41.5mm | 82.5mm | 19.5mm | 20mm | 6.5mm | 10.5mm | 63.5mm | 960 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |