About Plastic
More
About Ball and Roller Bearings
More
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
1mm | 3mm | 1mm | 440C Stainless Steel | 8 | 1 | 100,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
Metric Press-Fit Drill Bushings
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | Internal Chamfer | For Drill Bit Size | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
1 mm ID | ||||||||||||||
3 | 6 | One End | 1 mm | 0.006 to 0.016 | 0.004 to 0.01 | -0.1 to 0.1 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 000000 | 000000 | 000000 |
3 | 9 | One End | 1 mm | 0.006 to 0.016 | 0.004 to 0.01 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 00000 | 00000 | 00000 |
4 | 6 | One End | 1 mm | 0.002 to 0.008 | 0.019 to 0.027 | -0.01 to 0.254 | PM | Steel | Rockwell C61 | __ | 000000000 | 0000 | 0000 | 0000 |
4 | 9 | One End | 1 mm | 0.002 to 0.008 | 0.019 to 0.027 | -0.01 to 0.254 | PM | Steel | Rockwell C61 | __ | 000000000 | 00000 | 0000 | 0000 |
Metric Press-Fit Drill Bushings with Head
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They sometimes also work as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear over time. The flanged head protects your jig plate from damage caused by heavy use.
Although it's no longer an active standard, DIN 172 is still a common reference point for making sure parts are compatible with other parts and tools.
These bushings work in both countersunk and standard drill holes. To install, place the bushing inside the hole in your jig. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once centered, press the bushing into the hole with a hydraulic or lever press.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | OD, mm | Thick., mm | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
1 mm ID | ||||||||||||||
3 | 4 | 6 | 2 | 0.006 to 0.016 | 0.004 to 0.01 | -0.1 to 0.1 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 000000 | 000000 | 000000 |
3 | 7 | 6 | 2 | 0.006 to 0.016 | 0.004 to 0.01 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
Clear Impact-Resistant Polycarbonate Tubes
- Color: Clear
- Temperature Range: -40° to 200° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.
For technical drawings and 3-D models, click on a part number.
8 ft. Lg. | ||||||
---|---|---|---|---|---|---|
OD, mm | OD Tolerance, mm | ID, mm | ID Tolerance, mm | Specifications Met | Each | |
1 mm Wall Thick. (-0.13 mm to 0.13 mm) | ||||||
3 | -0.130 to 0.130 | 1 | -0.130 to 0.130 | FDA Compliant 21 CFR 177.1580, UL 94 HB | 00000000 | 00000 |