60mm Housing ID Bearings

Filter by

System of Measurement

Shaft Diameter

Length

Plain Bearing Type

For Housing ID

Material

Bearing Type

Shaft Mount Type

Lubrication

Dynamic Radial Load Capacity @ Speed

For Load Direction

Flange OD

Lubrication Method

Maximum Temperature

Dynamic Thrust Load Capacity @ Speed

REACH Compliance

Minimum Temperature

RoHS Compliance

Shaft Type

Lubricant

DFARS Compliance

Forward

How can we improve?

23 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 50 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60	40	6,200 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
60	50	7,750 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
60	60	9,300 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
60	70	10,850 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 50mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60mm	40mm	7,000 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 50mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60	60	9,250 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 50 mm Shaft Dia.
60	40	7,000 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000
60	60	10,500 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

Light Duty Dry-Running Sleeve Bearings

Use where high loads and speeds are not required.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Nylon Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Color	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	40mm	500 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	000000
60mm	50mm	620 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	00000
60mm	60mm	750 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	00000

Multipurpose Sleeve Bearings

These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 932 Bearing Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	40mm	12,400 lbs. @ 30 rpm	Required	-350° to 450°	00000000	000000
60mm	50mm	15,500 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
60mm	75mm	23,250 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
60mm	100mm	31,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 932 Bearing Bronze
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	75mm	20,300 lbs. @ 30 rpm	Required	-350° to 450°	00000000	000000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	32mm	70mm	5mm	4,950 lbs. @ 30 rpm	5,800 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
60mm	50mm	70mm	5mm	7,750 lbs. @ 30 rpm	5,800 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	32mm	70mm	5mm	5,600 lbs. @ 30 rpm	4,700 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	000000
60mm	50mm	70mm	5mm	8,750 lbs. @ 30 rpm	4,700 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
50 mm Shaft Dia.
60	32	70	5	5,600 lbs. @ 30 rpm	4,700 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	000000
60	50	70	5	8,750 lbs. @ 30 rpm	4,700 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	00000

Multipurpose Flanged Sleeve Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 932 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F	PV Max.		Each
For 50mm Shaft Dia.
60mm	40mm	70mm	5mm	12,400 lbs. @ 30 rpm	10,100 lbs. @ 30 rpm	Required	-350° to 450°	75,000	0000000	000000