A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

A metal shell adds strength.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Use where high loads and speeds are not required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.