About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Nylon bearings resist chemicals better than bronze bearings. They also retain oil better in wet environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4" Shaft Dia. | ||||||||
---|---|---|---|---|---|---|---|---|
7/8" | 1/2" | 95 lbs. @ 60 rpm | White | Lubricated | Mineral Oil | -20° to 210° | 0000000 | 000000 |
Light Duty Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/261/2610t21p1-d03c-digitall@halfx_637051674841837494.png?ver=imagenotfound)
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
1" | 1/2" | 95 lbs. @ 60 rpm | White | -10° to 220° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/263/2639t23p1-d03c-digitall@halfx_637051674143660163.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/577/57785k67p1-d03c-digitall@halfx_637051675817699955.png?ver=imagenotfound)
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||
3/4" | 3/4" | 95 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
7/8" | 3/4" | 95 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
1" | 3/4" | 95 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
For 1" Shaft Dia. | |||||||
1 1/4" | 3/4" | 95 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Nylon bearings resist chemicals better than bronze bearings. They also retain oil better in wet environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Nylon Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 95 lbs. @ 60 rpm | 90 lbs. @ 60 rpm | Lubricated | Mineral Oil | -20° to 210° | 00000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2705t28--9a0fc58fd61605198647-p9@halfx_637407738498197238.png?ver=imagenotfound)
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
1" | 1/2" | 1 1/4" | 3/16" | 95 lbs. @ 60 rpm | 120 lbs. @ 60 rpm | White | -20° to 210° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2706t28--830c5b7f0a61610478769-p9@halfx_637460539880578309.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 95 lbs. @ 60 rpm | 41 lbs. @ 60 rpm | White | -350° to 500° | ASTM D1710, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
Food Industry Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/577/57785k217--6d22558aaeb1610463822-p9@halfx_637460390237651383.png?ver=imagenotfound)
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re commonly used on machines in food plants and manufacturing plants for packaging and healthcare equipment. These bearings are bright blue, so they’re easy to spot in your line in case of breakage.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 3/4" | 15/16" | 1/16" | 95 lbs. @ 60 rpm | 50 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
3/4" | 3/4" | 15/16" | 1/8" | 95 lbs. @ 60 rpm | 50 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 0000 |
7/8" | 3/4" | 1 1/16" | 1/16" | 95 lbs. @ 60 rpm | 65 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
7/8" | 3/4" | 1 1/8" | 1/8" | 95 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
For 3/4" Shaft Dia. | ||||||||||
1" | 3/4" | 1 1/4" | 5/32" | 95 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
1" | 3/4" | 1 1/4" | 3/16" | 95 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
Acetal Plastic Bearings | ||||||||||
For 20mm Shaft Dia. | ||||||||||
23mm | 21.5mm | 30mm | 1.5mm | 95 lbs. @ 60 rpm | 85 lbs. @ 60 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |