About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Nylon bearings resist chemicals better than bronze bearings. They also retain oil better in wet environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | ||||||||
---|---|---|---|---|---|---|---|---|
1 1/8" | 1" | 190 lbs. @ 60 rpm | White | Lubricated | Mineral Oil | -20° to 210° | 0000000 | 000000 |
Light Duty Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/261/2610t21p1-d03c-digitall@halfx_637051674841837494.png?ver=imagenotfound)
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
7/8" | 1" | 190 lbs. @ 60 rpm | White | -10° to 220° | 000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
1" | 1" | 190 lbs. @ 60 rpm | White | -10° to 220° | 00000000 | 0000 |
For 1" Shaft Dia. | ||||||
1 1/8" | 1" | 190 lbs. @ 60 rpm | White | -10° to 220° | 00000000 | 0000 |
1 1/4" | 1" | 190 lbs. @ 60 rpm | White | -10° to 220° | 00000000 | 0000 |
MDS-Filled Nylon Bearings | ||||||
For 5/8" Shaft Dia. | ||||||
7/8" | 1" | 190 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1" Shaft Dia. | ||||||
1 1/8" | 1" | 190 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | ||||||
For 7/8" Shaft Dia. | ||||||
1 1/8" | 1 1/8" | 190 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/577/57785k67p1-d03c-digitall@halfx_637051675817699955.png?ver=imagenotfound)
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||
1" | 1 1/2" | 190 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 000000 |
For 1" Shaft Dia. | |||||||
1 1/4" | 1 1/2" | 190 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Nylon bearings resist chemicals better than bronze bearings. They also retain oil better in wet environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Nylon Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
1" | 1" | 1 1/4" | 1/8" | 190 lbs. @ 60 rpm | 120 lbs. @ 60 rpm | Lubricated | Mineral Oil | -20° to 210° | 00000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2705t28--9a0fc58fd61605198647-p9@halfx_637407738498197238.png?ver=imagenotfound)
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1" | 1/8" | 190 lbs. @ 60 rpm | 90 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
1" | 1" | 1 3/16" | 1/16" | 190 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 0000 |
1" | 1" | 1 3/16" | 1/8" | 190 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 0000 |
1" | 1" | 1 1/4" | 5/32" | 190 lbs. @ 60 rpm | 120 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||||||
1 1/8" | 1" | 1 3/8" | 1/16" | 190 lbs. @ 60 rpm | 95 lbs. @ 60 rpm | White | -20° to 210° | 00000000 | 00000 |
1 1/4" | 1" | 1 7/16" | 1/16" | 190 lbs. @ 60 rpm | 110 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 0000 |
1 1/4" | 1" | 1 7/16" | 1/8" | 190 lbs. @ 60 rpm | 110 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 00000 |
1 1/4" | 1" | 1 1/2" | 3/16" | 190 lbs. @ 60 rpm | 125 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | |||||||||
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1" | 1/8" | 190 lbs. @ 60 rpm | 90 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||||
1" | 1" | 1 3/16" | 1/16" | 190 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
1" | 1" | 1 3/16" | 1/8" | 190 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1" Shaft Dia. | |||||||||
1 1/4" | 1" | 1 7/16" | 1/16" | 190 lbs. @ 60 rpm | 110 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 00000 |
1 1/4" | 1" | 1 7/16" | 1/8" | 190 lbs. @ 60 rpm | 110 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 00000 |
Acetal Bearings | |||||||||
For 7/8" Shaft Dia. | |||||||||
1 1/8" | 1 1/8" | 1 5/16" | 1/16" | 190 lbs. @ 60 rpm | 95 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
Thermoplastic-Blend Bearings | |||||||||
For 22mm Shaft Dia. | |||||||||
25mm | 8mm | 32mm | 1.5mm | 190 lbs. @ 60 rpm | 320 lbs. @ 60 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Food Industry Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/577/57785k217--6d22558aaeb1610463822-p9@halfx_637460390237651383.png?ver=imagenotfound)
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 190 lbs. @ 60 rpm | 80 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 000000 |
1 1/4" | 1 1/2" | 1 1/2" | 3/16" | 190 lbs. @ 60 rpm | 80 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
Corrosion-Resistant Dry-Running Mounted Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/625/6254k24c2-d03c-digital-master1569533453-p9@halfx_637051287489373881.png?ver=imagenotfound)
Use these UHMW bearings in wet, corrosive environments.
Bearings with UHMW housing are made of a single UHMW polyethylene block. They have good vibration-damping qualities.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
UHMW Plastic Bearings with UHMW Plastic Housing | |||||||||||||
5/8" | 1 3/16" | 2 3/16" | 4 3/4" | 1 1/2" | 1 1/2" | 7/8" | 7/16" | 3 3/8" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 000000 |
3/4" | 1 5/16" | 2 1/2" | 5 1/4" | 1 1/2" | 1 1/2" | 15/16" | 7/16" | 3 3/4" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
1" | 1 7/16" | 2 3/4" | 5 1/2" | 1 1/2" | 1 1/2" | 15/16" | 7/16" | 4" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |