About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
13/16" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/8" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 16 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
20 | 32 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 18 mm Shaft Dia. | |||||||
22 | 28 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 20 mm Shaft Dia. | |||||||
24 | 25 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
25 | 25 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
26 | 25 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
28 | 25 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 25 mm Shaft Dia. | |||||||
30 | 20 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
32 | 20 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3741k9p1-d03c-digitall@halfx_637055970649769879.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 18mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22mm | 18mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
24mm | 18mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
25mm | 18mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/168/1688k16p1-d03c-digitall@halfx_637051672182538562.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/636/6364k32p1-d03c-digitall@halfx_637054633799099872.png?ver=imagenotfound)
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||
1 1/4" | 1 1/4" | 1 1/8" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7460n196polished-brassnegative_right_positive_front_standard15_1620947709_974@halfx_637565266804646966.png?ver=imagenotfound)
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 18 mm Shaft Dia. | |||||||
24 | 18 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
For 22 mm Shaft Dia. | |||||||
27 | 18 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/740/7407n149sandstonenegative_right_positive_front_standard15_1614724570_135@halfx_637502998507246792.png?ver=imagenotfound)
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 18mm Shaft Dia. | ||||||||
24mm | 18mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
Chemical-Resistant Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/662/6621k51p2-d03c-digital@halfx_637054642370484540.png?ver=imagenotfound)
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
PEEK Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
7/8" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 000000 |
For 3/4" Shaft Dia. | ||||||
7/8" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
1" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1" Shaft Dia. | ||||||
1 1/4" | 1" | 1,550 lbs. @ 60 rpm | Black | -40° to 500° | 00000000 | 00000 |
Multipurpose Dry-Running Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/152/1521n15p1-d03c-digital@halfx_637051293086750821.png?ver=imagenotfound)
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
For 1" Shaft Dia. | ||||||
---|---|---|---|---|---|---|
1 1/4" | 1" | 1,550 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
3/4" | 5/8" | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 00000 |
7/8" | 5/8" | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 14mm Shaft Dia. | ||||||
18mm | 18mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
20mm | 18mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
For 16mm Shaft Dia. | ||||||
20mm | 16mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
22mm | 16mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,550 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
7/8" | 1 1/4" | 1 1/4" | 1/8" | 1,550 lbs. @ 60 rpm | 1,800 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 7/8" Shaft Dia. | ||||||||||
15/16" | 15/16" | 1 5/16" | 1/32" | 1,550 lbs. @ 60 rpm | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Metric 841 Bronze Bearings | ||||||||||
For 20mm Shaft Dia. | ||||||||||
26mm | 25mm | 32mm | 3mm | 1,550 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
For 25mm Shaft Dia. | ||||||||||
30mm | 20mm | 35mm | 2.5mm | 1,550 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
32mm | 20mm | 39mm | 3.5mm | 1,550 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/373/3731k9--fcc0ac8d8c1605887326-p9@halfx_637414625303035933.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 14mm Shaft Dia. | ||||||||||
18mm | 18mm | 22mm | 2mm | 1,550 lbs. @ 60 rpm | 900 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
20mm | 18mm | 26mm | 3mm | 1,550 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 18mm Shaft Dia. | ||||||||||
22mm | 18mm | 26mm | 2mm | 1,550 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1677k9--4831a7b90d81610475231-p9@halfx_637460504502675306.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
13/16" | 1 1/4" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,550 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/711/7119n136-1621887938-p9@halfx_637574671502365871.png?ver=imagenotfound)
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
14 mm Shaft Dia. | ||||||||||
18 | 18 | 22 | 2 | 1,550 lbs. @ 60 rpm | 900 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
20 | 18 | 26 | 3 | 1,550 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
18 mm Shaft Dia. | ||||||||||
22 | 18 | 26 | 2 | 1,550 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
24 | 18 | 30 | 3 | 1,550 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3746k16c1-d03c-digital-master1569533447-p9@halfx_637051268441216763.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 25mm Shaft Dia. | |||||||||||
32mm | 20mm | 39mm | 3.5mm | 1,550 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/152/1523n12--1abfe3ec0cb1610725761-p9@halfx_637463009806623022.png?ver=imagenotfound)
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1 1/8" | 1/8" | 1,550 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 000000 |
For 3/4" Shaft Dia. | |||||||||
1" | 1" | 1 1/4" | 3/16" | 1,550 lbs. @ 60 rpm | 990 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
1 1/8" | 1" | 1 1/2" | 1/8" | 1,550 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||
1 1/4" | 1" | 1 1/2" | 1/8" | 1,550 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2962t2--36c18249be01610556109-p9@halfx_637461313471637916.png?ver=imagenotfound)
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||
3/4" | 5/8" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | -70° to 450° | 000000 | 000000 |
Chemical-Resistant Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/662/6627k22c1-d03c-digital-master1569619874-p9@halfx_637052070891281624.png?ver=imagenotfound)
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 000000 |
For 3/4" Shaft Dia. | |||||||||
7/8" | 1" | 1 1/8" | 1/16" | 1,550 lbs. @ 60 rpm | 780 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
1" | 1" | 1 1/4" | 1/8" | 1,550 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||||||
1 1/8" | 1" | 1 3/8" | 1/16" | 1,550 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Black | -20° to 450° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 5/8" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
7/8" | 5/8" | 1 1/8" | 1/8" | 1,550 lbs. @ 60 rpm | 2,700 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||||||
For 16mm Shaft Dia. | ||||||||||
20mm | 16mm | 24mm | 2mm | 1,550 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
22mm | 16mm | 28mm | 3mm | 1,550 lbs. @ 60 rpm | 2,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31c4-d03c-digital-master1569619879-p9@halfx_637052023814153267.png?ver=imagenotfound)
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
3/4" | 5/8" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -70° to 450° | 000000000 | 000000 |
High-Speed Oil-Embedded Mounted Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/381/3813t12c2-d03c-digital-master1569533449-p9@halfx_637051213216720405.png?ver=imagenotfound)
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.
Bearings with an oil cup have a reservoir that distributes additional oil onto the bearing. A self-closing hinged cover keeps out contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
With Oil Cup | ||||||||||||||
5/8" | 15/16" | 2" | 4 1/32" | 1 1/4" | 1 1/4" | 21/32" | 21/64" | 2 31/32" | 1,550 lbs. @ 60 rpm | -40° to 240° | Self Aligning | Lubricated | 0000000 | 000000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/793/7930k17c1-d03c-digital-master1569619880-p9@halfx_637052134976904863.png?ver=imagenotfound)
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
5/8" | 45/64" | 1 13/32" | 3 3/4" | 1 1/4" | 1 1/4" | 9/16" | 3/8" | 3" | 1,550 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |