We will reply to your message within an hour.
Choose the ID, OD, and length you need.
Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
These bushings are made of stainless steel, which provides excellent corrosion resistance.
Made of durable tungsten carbide, these bushings outlast steel.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.
The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling.
The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.
The serrations at the top of the bushing grip to prevent rotation and spin out.
Insert these bushings into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in in place by a separate locking part.
Mount a workpiece on these motorized turntables for smooth and continuous 360° rotary motion useful for creating circular welds. Turntables tilt and lock in place at angles up to 90° in 15° increments.