6000-2Z Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Bearing Trade Number

Width

Bearing Seal Type

For Housing ID

Ring Material

Ball Bearing Profile

Ball Material

For Load Direction

Shaft Mount Type

Cage Material

ABEC Rating

Radial Clearance Trade Number

Lubrication

Lubricant

Bearing Type

Inner Ring Type

REACH Compliance

RoHS Compliance

DFARS Compliance

3 Products

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

Shielded

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6000-2Z	10mm	26mm	8mm	Steel	1,000	440	28,000	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	000000

Shielded

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Shielded bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

Bearings are 440C stainless steel for good corrosion resistance.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

Shielded

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
6000-2Z	10mm	26mm	8mm	440C Stainless Steel	870	350	28,000	Lubricated	-40° to 240°	ABEC-1	00000000	000000