These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

Use these bearings where high speed and precision are not required.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing.

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Synthetic grease or graphite enables these bearings to operate in high temperatures.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

A bolt in each corner makes for a secure, even hold.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.