These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Bearings are 440C stainless steel for good corrosion resistance.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

The flange ensures proper positioning inside a tube or housing.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.

With thinner inner and outer rings, these bearings keep your machines more compact than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. Mounting holes on the rings allow for fastening onto hollow joints and shafts.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Use these bearings in corrosive environments and under water.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

These roller bearings handle extremely high speeds for their small size.