A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Mount these bearings onto a hex shaft.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.