We will reply to your message within an hour.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.
These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.
Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.
Slide these shims under the screw head to shorten the shoulder length.
Spin these shims onto screw threads to extend the shoulder length.
Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.
Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.
Place these shims under sharpened dies to restore their original height and extend their life.
Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.
Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.
Also known as arbor spacers, these are notched to space components on a keyed shaft.
Slide onto a shoulder screw to shorten the length of the shoulder.
Use round shims to precisely align, level, and adjust spacing on shafts and machinery.
Place these shims under sharpened dies to restore their original height and extend the life of the dies.
Spin these tight-fitting shims onto your screw's threads to lengthen the shoulder.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Choose the ID, OD, and length you need.
Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.
These bushings are made of stainless steel, which provides excellent corrosion resistance.
Made of durable tungsten carbide, these bushings outlast steel.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.
The serrations at the top of the bushing grip to prevent rotation and spin out.
The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.
Insert these bushings into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in in place by a separate locking part.
The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling.