We will reply to your message within an hour.
These carriages and guide rails are steel.
Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.
A black chrome plating diffuses light, preventing reflecting light from causing equipment to malfunction.
Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.
Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.
A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.
Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.
Run many cycles in tight spaces before replacing or re-greasing carriages.
With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.
With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.
These tiny carriages and guide rails are sized for electronic and other precision applications.
Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.
Mount to vertical surfaces for applications where tight tolerances aren't required.
For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.
With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.
A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.
A handle on the side of the carriage locks the carriage in place.
Create a self-aligning system that can be locked in place with these carriages and guide rails.
Use these carriages and guide rails in temperatures up to 300° F.
With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.
For applications with low clearance, these carriages protrude less than 5 mm above their rails.
Compensate for rail misalignment in low-clearance applications with these carriages and guide rails.
Mate with a T-slotted rail to add linear motion to your assembly.
Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.
Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.
The square profile prevents loads from twisting and rotating.
C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.
Build loops, circuits, and curved paths in assembly stations and other repetitive processes.
A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.
Mount along a wall or other vertical surface.
These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.
Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.
Use these carriages and guide rails for light loads where precise movement is not required.
Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.
V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.
Nylon rollers provide low-friction movement for light loads and corrosive environments.
High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.
Combine with a T-slotted rail to add linear motion to your assembly.
Create a low-maintenance system with loops and curved paths in assembly stations and other repetitive processes.
Support loads while guiding and positioning work with these steel rollers and guide rails.
Nylon rollers and aluminum rails make these good for light duty applications.
Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.
Roller bearing carriages handle heavier loads than ball bearing and track roller carriages.
Slides have a row of ball bearings on each side of the rail.
With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.
Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.
Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.
Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.
A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".
Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.
A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
A thumb screw locks the slide to prevent movement in systems where vibration is present.
Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.
Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.
Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.
Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.
Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.
Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.
With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.
A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.
With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.
The flanged housing makes these bearings a good solution for vertical linear motion applications.
The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.
Mount these bearings on a support rail shaft for applications requiring maximum rigidity.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.
With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.
With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines.
For precise positioning in your linear motion system, add these brakes to manually lock a bearing in place on a shaft.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.
Add your own stepper motor and controller to precisely move the ball screw and carriage smoothly at high speeds, like a head on an inkjet printer.
With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.
Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions.
For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length.
Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.