Choose the ID, OD, and length you need.

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.

Made of durable tungsten carbide, these bushings outlast steel.

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.

Avoid wear caused by repeatedly pressing bushings into your jig fixture. Instead, press fit these sleeves into the fixture one time, and then swap bushings with different IDs in and out to change the size of your bit.

Designed to grip slippery plastic, the knurls on these bushings keep them from spinning while you drill. Their hold is stronger than serrated bushings, so they can withstand more force.

Serrations on these bushings dig into wood, aluminum, and other soft metals to keep them from spinning while you drill. Also known as jig bushings, they fit inside fixture plates to guide drill bits, counterbores, and reamers.

Twist these lock rings onto bushings to secure them in drilled holes.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Also known as Oilite® bearings.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

To ensure compatibility with other parts, the materials and dimensions of these bearings meet strict military standards. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

Reduce your carbon footprint without sacrificing performance. Made of recycled thermoplastic, these bearings are a sustainable alternative to standard plastic dry-running bearings.

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in moving equipment.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

The materials and dimensions of these bearings meet strict military standards to ensure compatibility with other parts. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Use where high loads and speeds are not required.

Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in loads parallel and perpendicular to your shaft.

An aluminum shell adds strength.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Also known as Oilite® bearings.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Use these UHMW bearings in wet, corrosive environments.

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Made from slippery materials, these bearings reduce friction without the oily mess.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.