Filter by
DFARS Compliance
Certification
Chargers for Large-Cell Batteries
A
B
C
D
After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
Style B have mounting holes to attach them directly to mobile equipment, such as lift tables and floor scrubbers—no need to lug your equipment to a charger to power it.
Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.
Chargers that cannot be sold to the regions listed are restricted by local energy efficiency regulations or product labeling requirements.
Style A—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries
A
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Battery Connection Current | Power Plug Type | Power Cord Lg., ft. | Input Voltage  | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 80-150 | 10 | Terminal Clamp (8 ft.) | 50A | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 0000000 | 0000000 |
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 150-350 | 25 | Terminal Clamp (8 ft.) | 50A | Three Prong | 8 | 120V AC | 8" | 10" | 10" | CA | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 24 | 80-150 | 10 | Terminal Clamp (8 ft.) | 50A | Three Prong | 7 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 24 | 150-350 | 25 | North American Style Connector (8 ft.) | 50A | Three Prong | 7 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA | 000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 36 | 150-350 | 25 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 48 | 150-350 | 25 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA, OR | 0000000 | 000000 |
Style B—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries
B
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||||||
| Lithium Iron Phosphate (LiFePO4) | 48 | 150-350 | 25 | 3/8" Ring Terminal (8 ft.) | Three Prong | 8 | 120V AC | 6" | 9" | 8" | 4 | 3/8" | No | CA, OR | 0000000 | 0000000 |
Style C—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
C
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 1.2-200 | 1.25 | Terminal Clamp (18"), 5/16" ID Ring Terminal (18"), Two-Pin SAE Connector (6 ft.) | Two Prong | 6 | 120V AC | 2" | 7" | 3 3/4" | 00000000 | 000000 |
Style D—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
D
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-68 | 2, 10 | Terminal Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/4" | 10 1/2" | 3 3/4" | 000000 | 0000000 |
| 12 | 13-100 | 20 | Terminal Clamp (6 ft.) | Three Prong | 6 | 120V AC | 11" | 8" | 6" | 000000 | 000000 |
Style D—For Wet-Cell Lead Acid Batteries
D
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-59 | 3, 6 | Terminal Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/8" | 10 1/4" | 3 1/4" | 0000000 | 000000 |
Water-Resistant Chargers for Large-Cell Batteries
A
B
C
D
Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
When used with lithium batteries, Style D chargers must match the battery’s lithium type.
Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.
Style A—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
A
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Mounting Hole Dia. | Mounting Fasteners Included | Each | |
| 12/24 | 5-100 | 2.5, 5 | Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18") | Three Prong | 6 | 120V AC | 5 1/8" | 8 7/8" | 2" | 3/8" | No | 00000000 | 0000000 |
Style B—For Wet-Cell Lead Acid Batteries
B
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Cannot Be Sold To | Each | |
| 12 | 150-350 | 25 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 2 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | CA, OR | 0000000 | 0000000 |
| 24 | 150-350 | 25 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 2 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | CA | 0000000 | 000000 |
Style C—For Wet-Cell Lead Acid Batteries
C
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
| 12 | 72 | 6 | Terminal Clamp (4 ft.) | Three Prong | 6 | 120V AC | 3 1/2" | 5" | 2 3/8" | 0000000 | 0000000 |
Style D—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet-Cell Lead Acid Batteries
D
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Each | |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 24 | 55-425 | 40 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 0000000 |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 36 | 55-425 | 26 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 000000 |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 48 | 55-425 | 20 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 000000 |