Brightly colored for visibility, this coated steel chain is commonly used as a safety barrier to mark restricted areas.

The twisted links allow this chain to lie flatter than other light duty chain.

With a maximum temperature of 500° F, this chain withstands higher temperatures than other steel chain.

This chain is approximately 20% stronger than Grade 40/43 chain and 60% stronger than Grade 30 chain.

The links have smooth sides to prevent the chain from snagging.

This is the strongest tangle-resistant chain we offer. Shorter links make it easier to coil and less likely to knot.

Not only is this chain made of hardened steel for cut resistance, it has a nylon sleeve to protect against abrasion.

For maximum security, square links are more difficult to cut with bolt cutters than round links.

A vinyl cover prevents the chain from scratching items that come in contact with it.

The links of this chain are formed into a figure eight then twisted into a 90° angle for use in lightweight hanging applications.

The links are trimmed to allow chain to sit closer against a chain wheel or sprocket.

This chain is approximately 25% stronger than Grade 80 chain.

The strongest chain grade we offer, it’s approximately 20% stronger than Grade 100 chain and 50% stronger than Grade 80 chain.

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

Once secured with the included locking pin, these links must be cut off to be removed.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Use these links for general lifting applications.

Also known as quick links, these links thread closed by hand or with a wrench.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Mix-and-match posts and chain to create a barrier that suits your needs.

Links split in half and snap back together. Use to connect two lengths of chain.