We will reply to your message within an hour.
A ring around the outside of these dollies supports loads and prevents them from slipping off.
In addition to holding round drums, most of these dollies also support square cartons and crates.
The solid platform on these dollies provides the best overall support.
The casters on these dollies are mounted outside the platform for increased stability.
The platform on these dollies is open in front to make loading and unloading easier.
A T-style handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles.
Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping.
Sized for overpack drums, these dollies have extra-large platforms to accommodate big loads. They are often used with a sorbent pad to soak up spills and leaks.
Contain spills when moving and storing drums.
With the push of a button the hydraulic lift raises the drum, while the chute controls the flow of the material being dispensed to prevent splashes and spills.
A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying
These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns.
Tilt these trucks and roll them like a hand truck to move drums. They tilt flat for dispensing.
Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum to dispense.
Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs.
Move a drum where you need it, then dispense.
Store, mix, and drain drums in a single location.
These trucks let you lift, transport, and place drums without a forklift.
A second set of axle-mounted wheels offers better load support and stability to handle heavy loads over longer distances.
These two-wheeled trucks are good for moving drums short distances.
These dollies provide the leverage you need to move file cabinets and crates. Slide one end under the edge of a load and step down on the other end to raise the load.
To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum.
Use rollers to apply sealants and coatings to concrete and asphalt.
These paint rollers conform to round surfaces up to 2 ½" diameter.
Coat large curved surfaces of various sizes with these rollers. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces.
Quickly paint round surfaces as small as 1" and up to 10 feet in diameter. The two rollers adjust in 30° increments, so you can adjust the angle to suit your application.
Give thick coatings a smooth finish with these hard phenolic roller covers. Designed to apply anti-slip coatings to floors, they can also be used with epoxies and other thick protective coatings.
Spread thick adhesives and epoxies to smooth surfaces, such as laminates and fiberglass, with these hard rollers.
Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.
The shield on these rollers prevents spatter from creating a mess.
These short, narrow roller covers fit behind and between objects.
For general purpose applications, these knitted rollers leave behind a textured finish that hides blemishes and uneven spots.
Made from foam, these paint roller covers don't have any fibers to shed. When used on very smooth surfaces, they create a finish similar to that of a paint sprayer.
Use these small, disposable, light foam rollers for quick touch-up jobs.
Use these frames to cover large, flat surfaces quickly.
These frames have a telescoping handle that extends from 20.5" to 33".
These short, narrow rollers cover areas where standard paint rollers won't fit.
Made from foam, these paint roller covers don't have any fibers to shed and leave a smooth finish.
For quick jobs without the clean-up, these rollers come with a small plastic tray.
Keep roller covers secure with the gripping tabs on these frames.
These paint roller covers are woven, so they resist shedding fibers and leave a smoother finish than knitted covers.
These frames adjust to hold 12", 14", and 18" wide roller covers, so you can take on different-sized jobs with the same frame. Use them to cover large, flat surfaces quickly.
Fill the bottle-like handle on these rollers with paint and dispense as you roll, so you don't have to stop at a paint tray. Rollers are short for quick touch-up jobs or to fit in tight spaces.
Cover large areas quickly without the need for a paint tray. These rollers have a tube that draws paint into the handle. Squeeze the trigger to keep the roller filled with fresh paint as you go.
To create a convenient dispensing station, pair these stands with a round, 5-gallon safety can.
Keep drum contents warm and ready to roll.