The barrel is longer than other lugs, so you can compress it twice for an extra-tight grip in high-vibration applications.

With a thicker tab and OD, these lugs are more durable and dissipate more heat from high electrical loads than standard compression lugs. They have a long barrel, so you can compress them twice for an extra-tight grip in high-vibration applications.

Solid pins make it easy to insert stranded wire into screw-clamp connections. The plastic cover on the barrel of these lugs provides electrical insulation to prevent short-circuiting with nearby wire.

Save space on your mounting surface by installing wire vertically.

Thread these lugs onto grounding or neutral bars commonly found in panelboards. For a secure connection without crimping, tighten the set screw.

To prevent short-circuiting with nearby wire, a plastic cover insulates the barrel on these lugs. Tighten the set screw for a secure connection without crimping.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. These wire ferrules add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

The connection on these terminals is completely covered with insulation when mated, leaving no metal exposed and preventing short-circuiting with nearby wire. Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

When heated, the enclosed solder in these terminals melts forming the most secure and electrically conductive connection we offer. The plastic insulation also shrinks when heated, sealing out water and contaminants. Also known as bullet terminals.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Mount these elongated ring terminals on a range of threaded screw and stud sizes—their connection is more secure than spade or hook terminals.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The plastic insulation also shrinks when heated, forming a seal to keep out water and contaminants.

With a thicker ring and a plastic cover on the barrel, these terminals are more durable than standard ring terminals and insulated to prevent short circuiting with nearby wire.

The elongated ring can be mounted with a range of screw sizes.

Thicker than standard ring terminals and noninsulated, these terminals are best when you need durability and to easily inspect the wire connection.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. These terminals are a hybrid of ring and spade terminals; they install without removing the mounting screw, yet resist being pulled off.

A plastic cover on the barrel of these terminals provides electrical insulation to prevent short-circuiting with nearby wire. Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it. They are noninsulated, so you can easily inspect the wire connection.

Designed for high-temperature applications such as motors, ovens, and furnaces, these terminals are made of heat-resistant materials. They slide together and pull apart with ease, so they are convenient for applications that require frequent connections.

Connect two wires to the same terminal—these female terminals have a male tab piggybacked onto them that connects with a female quick-disconnect. A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire.

A male tab piggybacked onto these female terminals lets you connect two wires to a single quick-disconnect terminal. They are noninsulated, so you can easily inspect the wire connection.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. When heat is applied, the insulation shrinks, forming a seal to keep out water and contaminants. The enclosed solder also melts when heated, creating the most secure and electrically conductive connection we offer.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The insulation also shrinks when heated, forming a seal to keep out water and contaminants.

Since these terminals aren’t insulated, you can easily inspect the wire connection. The solid pin makes it easier to insert stranded wire into screw-clamp connections.

Thicker walls than standard battery terminal lugs make these more durable.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Made of lead, these clamps resist corrosion to stand up to marine environments. Use a lug to attach your cable to the stud.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Keep on hand the set screw lugs, nuts, and bolts needed to install single- or three-phase dry-type transformers.

Keep a variety of ferrule sizes on hand.