Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Pair with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Shorter than shoulder screws for use in thin material.

An unthreaded barrel allows quick assembly with a press or a hammer.

Add length to a binding barrel.

An unthreaded barrel allows quick assembly with a press or a hammer.

These barrels and caps are corrosion resistant in wet environments.

Angled under the head for a flush finish in countersunk holes.

A tamper-resistant Torx driver is required for installation and removal.

These binding barrels and screws have good chemical resistance.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Bolts are spring-loaded to stay latched until you activate the pull.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

To prevent tampering, the mounting screws on these latches are concealed.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

The spring-loaded bolt stays latched until you pull it back.

Choose these locks if you need several locks that open with the same key.