Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add panels to T-slotted framing to create machine guards and strip doors.

Slide drawers, panels, and doors with these tracks and rollers.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Connect T‐slotted rails and reinforce joints for structural stability.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches, workstations, and stands.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

To provide corrosion resistance in wet environments, this framing is galvanized.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Support the corners of strut channel structures.

Mount to your strut channel to support rail, tube, or pipe.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Mount between two strut channels to create a handhold.

Attach cable, pipe, tubing, and other items to your strut channel.

Mount these brackets to strut channel to add stair treads. They’re also known as stringers.

Smoothly move lightweight curtains overhead along strut channel.

Create continuous runs of channel without corners.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Brackets mount on the outside of strut channel to allow trolley movement.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Run wires through the hollow stud of these nuts or use them as vents.

Connect two channels to create a stacked channel.

Keep hardware centered in the strut channel slot.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

Slide the strut channel into the tube for telescoping length adjustments.

Use with hex nuts to connect threaded rod.

This welded, one-piece strut channel combines two strut channels back-to-back.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Notches on these washers grip the channel to keep them in place.

Make workstations, conveyors, and shelving for heavy loads. These clamp-on framing rails and fittings are the thickest and sturdiest in our offering.

Create custom brackets to support metal handrails on stairs, ramps, and railings by cutting, machining, and welding these components.

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Route pipe, tubing, and conduit across strut channel.

For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t.

Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.