Easy-Position Band Saw Fences
Magnets firmly hold these fences in any position and on any size cast iron table to guide straight cuts with your saw. Engage the magnets with the turn of a knob.
Lg. | Ht. | Material | Includes | Each | |
15" | 3" | Aluminum | Magnets | 0000000 | 0000000 |
Linear Scales with Digital Readout and Fence for Saws
Install a digital readout (DRO) stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.
Measuring Range | Measuring Increments | Accuracy | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Fractional Increments | Inch | Metric, mm | For Axis | Lg. | Wd. | Power Source | Batteries Included | Mount. Hardware Included | Each | |
0"-94" | 0-2,400 | 0.001" | 0.01 | 1/64" | ±0.01" | ±0.25 | X | 100" | 8.38" | Battery | Yes | Yes | 0000000 | 000000000 |
Replacement 3-Volt Lithium Battery (Pkg. of 1) | 0000000 | Pkg. | 00000 |
Digital Flat-Material Length Measurers for Saws
Accurately cut 2×4s, boards, and other materials without the hassle of a tape measure or creating jigs as a stop. As you slide material along your saw fence, the digital counter measures its length, so you know what length you’re cutting. These measurers clamp onto most saw fences. Program the blade offset, including its angle, to account for the distance between the measurer and the blade, so you get an accurate measurement.
Saw fence extenders are required for saw fences shorter than 95 mm high. There must be at least two holes in the fence on each side of the saw blade to install these adapters.
Measurers | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Overall | AA Batteries | |||||||||||||
Material Travel Direction | Accuracy | Lg. Measured, ft. | Speed, fpm | Clamping Clearance | Wheel Circumference | Tread Wd. | Lg. | Wd. | Ht. | Batteries Included | Each | Pkg. Qty. | Pkg. | ||
Inches, Feet, Millimeters, Centimeters, Meters | |||||||||||||||
One Plastic Wheel with Rubber Tread | |||||||||||||||
Side to Side | ±0.029", ±0.75 mm | 99 | 780 | 3/8" | 6" | 1/2" | 6" | 3" | 4 1/2" | No | 0000000 | 0000000 | 4 | 00000000 | 00000 |
Lg. | Ht. | Thick. | Each | |
23" | 3 11/16" | 1/4" | 0000000 | 000000 |