Easy to use, strong, and versatile, these hose clamps are the most common. Tighten their slotted screw with a screwdriver, hex nut driver, or wrench.

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

These clamps form a 360° seal around your hose or tube to prevent leaks.

A double ring of thick wire provides a complete seal around large-diameter hose.

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

These clamps have a wider band than other constant-tension clamps, which provides more coverage and reduces the chance of leaks.

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

Twist the thumb head with your fingers to tighten these clamps. Once tightened, remove the thumb head to minimize your clamp’s profile and make it harder to tamper with.

Slide these clamps over your hose and heat-shrink them with a heavy duty heat gun. This process lets them conform to any shape hose.

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Also known as bridge clamps, these worm-drive clamps align with the spiral support on wire duct hose to provide a tight seal.

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

An extended tail acts as a liner to protect hose and tube from being cut by the slots in the band.

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

The hose clamps in these assortments have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into hose and tube.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Use with interlocking-clamp hose fittings to replace a damaged clamp. They consist of two halves held together by nuts and bolts.

Use these buckles to secure Light Duty Metal Strapping around pipe or packages.

Crimp these seals with a sealer after pulling strap tight with a tensioner.