Stud-Mount Ball Transfers
Install these ball transfers in a threaded hole or use a nut to secure.
Steel balls are durable. Stainless steel balls offer the most corrosion resistance. Nylon and polypropylene balls are nonmarking. Nylon is stronger than polypropylene. However, polypropylene resists chemicals better than nylon.
Ball transfers with an angled working orientation can be used to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Thread Size  | Stud Lg. | Temperature Range, °F | Dia. | Ctr.-to-Ctr. | Each | ||
Steel Ball | |||||||||||||
Zinc-Plated Steel Housing | |||||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 3/4" | __ | __ | __ | 0000000 | 00000 |
| A | 1" | 200 | 1 1/4" | 1 3/8" | Ball Up, Ball Down, Angle | __ | 5/16"-18 | 3/4" | __ | __ | __ | 0000000 | 00000 |
| B | 1" | 150 | 1 3/8" | 1 1/2" | Ball Up, Ball Down | __ | 1/4"-20 | 23/32" | __ | __ | __ | 00000000 | 00000 |
| B | 1" | 150 | 1 1/2" | 1 1/2" | Ball Up, Ball Down | __ | 1/4"-20 | 7/8" | __ | __ | __ | 00000000 | 00000 |
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| C | 1" | 65 | 1 9/16" | 1 7/8" | Ball Up | __ | 1/4"-20 | 7/8" | __ | __ | __ | 0000000 | 0000 |
| C | 1" | 440 | 1 1/4" | 1 1/2" | Ball Up, Ball Down | __ | 5/16"-18 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| C | 1 1/2" | 250 | 2 5/16" | 2 3/16" | Ball Up, Ball Down | __ | 3/8"-16 | 1" | __ | __ | __ | 0000000 | 00000 |
| D | 1" | 65 | 1 3/8" | 1 13/32" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | __ | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 1/4"-20 | 11/16" | __ | __ | __ | 0000000 | 0000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 3/8"-16 | 11/16" | __ | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | __ | __ | __ | 0000000 | 0000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| F | 1" | 270 | 1 25/64" | 1 3/8" | Ball Up, Ball Down, Angle | __ | M8 | 1 19/32" | __ | __ | __ | 00000000 | 000000 |
| G | 3/16" | 40 | 23/64" | 17/32" | Ball Up, Ball Down, Angle | __ | M6 | 19/32" | __ | __ | __ | 00000000 | 00000 |
| G | 5/8" | 260 | 13/16" | 31/32" | Ball Up, Ball Down, Angle | __ | M6 | 15/32" | __ | __ | __ | 00000000 | 000000 |
| H | 1/2" | 75 | 25/32" | 13/16" | Ball Up, Ball Down, Angle | __ | 5/16"-24 | 21/32" | __ | __ | __ | 00000000 | 000000 |
| J | 3/4" | 55 | 31/32" | 1 9/32" | Ball Up, Ball Down, Angle | __ | M8 | 1" | __ | __ | __ | 00000000 | 00000 |
| J | 1" | 120 | 1 9/32" | 1 9/16" | Ball Up, Ball Down, Angle | __ | M8 | 1" | __ | __ | __ | 00000000 | 00000 |
Black-Oxide Steel Housing | |||||||||||||
| K | 1" | 65 | 1 3/8" | 1 3/32" | Ball Up | __ | 5/16"-18 | 11/16" | __ | __ | __ | 00000000 | 00000 |
| K | 1" | 150 | 1 7/16" | 1 7/32" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 13/32" | __ | __ | __ | 0000000 | 00000 |
| K | 1" | 150 | 1 7/16" | 1 7/32" | Ball Up, Ball Down, Angle | __ | 5/16"-18 | 11/16" | __ | __ | __ | 0000000 | 00000 |
| K | 1 1/4" | 250 | 1 3/4" | 1 15/32" | Ball Up, Ball Down, Angle | __ | 3/8"-16 | 15/16" | __ | __ | __ | 0000000 | 00000 |
| L | 1" | 150 | 1 1/2" | 2 7/16" | Ball Up, Ball Down, Angle | __ | 3/8"-16 | 11/16" | __ | 5/32" | 2 3/16" | 0000000 | 00000 |
| L | 1 1/8" | 200 | 1 21/32" | 2 7/16" | Ball Up, Ball Down, Angle | __ | 3/8"-16 | 11/16" | __ | 5/32" | 2 3/16" | 0000000 | 00000 |
| L | 1 1/4" | 250 | 1 3/4" | 2 7/16" | Ball Up, Ball Down, Angle | __ | 3/8"-16 | 11/16" | __ | 5/32" | 2 3/16" | 0000000 | 00000 |
Stainless Steel Ball | |||||||||||||
Zinc-Plated Steel Housing | |||||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| A | 1" | 200 | 1 1/4" | 1 13/32" | Ball Up, Ball Down, Angle | __ | 5/16"-18 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | __ | __ | __ | 0000000 | 00000 |
| J | 3/4" | 55 | 31/32" | 1 9/32" | Ball Up, Ball Down, Angle | __ | M8 | 1" | __ | __ | __ | 00000000 | 00000 |
Stainless Steel Housing | |||||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| A | 1" | 200 | 1 1/4" | 1 13/32" | Ball Up, Ball Down, Angle | __ | 5/16"-18 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| B | 1" | 150 | 1 3/8" | 1 1/2" | Ball Up, Ball Down | __ | 1/4"-20 | 23/32" | __ | __ | __ | 00000000 | 00000 |
| C | 5/8" | 200 | 53/64" | 15/16" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 000000 |
| C | 1" | 100 | 1 17/32" | 1 27/32" | Ball Up | __ | 1/4"-20 | 7/8" | __ | __ | __ | 0000000 | 00000 |
| C | 1 1/2" | 350 | 2 5/16" | 2 3/16" | Ball Up, Ball Down | __ | 3/8"-16 | 1" | __ | __ | __ | 0000000 | 00000 |
| D | 1" | 125 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 1/4"-20 | 11/16" | __ | __ | __ | 0000000 | 00000 |
| D | 1" | 125 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 3/8"-16 | 11/16" | __ | __ | __ | 00000000 | 00000 |
| D | 1" | 125 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | __ | __ | __ | 0000000 | 00000 |
| E | 1/2" | 100 | 11/16" | 7/8" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| J | 1" | 120 | 1 9/32" | 1 9/16" | Ball Up, Ball Down, Angle | __ | M8 | 1" | __ | __ | __ | 00000000 | 00000 |
| J | 1" | 120 | 1 9/32" | 1 9/16" | Ball Up, Ball Down, Angle | __ | M8 | 1 31/32" | __ | __ | __ | 00000000 | 00000 |
Aluminum Housing | |||||||||||||
| M | 3/16" | 20 | 1/4" | 5/16" | Ball Up | __ | M2 | 3/32" | __ | __ | __ | 0000000 | 00000 |
| M | 1/4" | 35 | 27/64" | 1/2" | Ball Up | __ | M3 | 1/4" | __ | __ | __ | 0000000 | 00000 |
| M | 5/16" | 55 | 1/2" | 19/32" | Ball Up | __ | M4 | 5/16" | __ | __ | __ | 0000000 | 00000 |
| M | 5/16" | 55 | 1/2" | 19/32" | Ball Up, Ball Down, Angle | __ | M4 | 5/16" | __ | __ | __ | 00000000 | 000000 |
Nylon Plastic Housing | |||||||||||||
| N | 1" | 110 | 1 3/8" | 2 1/16" | Ball Up, Ball Down, Angle | Gray | 5/16"-18 | 5/8" | 32° to 104° | __ | __ | 0000000 | 00000 |
Nylon Plastic Ball | |||||||||||||
Zinc-Plated Steel Housing | |||||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 3/4" | 32° to 212° | __ | __ | 0000000 | 00000 |
| A | 1" | 200 | 1 1/4" | 1 3/8" | Ball Up, Ball Down, Angle | __ | 5/16"-18 | 3/4" | 32° to 212° | __ | __ | 0000000 | 00000 |
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| C | 1" | 65 | 1 17/32" | 1 27/32" | Ball Up | __ | 1/4"-20 | 7/8" | 0° to 250° | __ | __ | 0000000 | 0000 |
| C | 1" | 440 | 1 1/4" | 1 1/2" | Ball Up, Ball Down | __ | 5/16"-18 | 3/4" | Not Rated to 1500° | __ | __ | 00000000 | 00000 |
| C | 1 1/2" | 250 | 2 5/16" | 2 3/16" | Ball Up, Ball Down | __ | 3/8"-16 | 1" | 32° to 212° | __ | __ | 0000000 | 00000 |
| D | 1" | 65 | 1 3/8" | 1 13/32" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | 40° to 140° | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 1/4"-20 | 11/16" | 32° to 212° | __ | __ | 0000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 3/8"-16 | 11/16" | Not Rated to 125° | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | 32° to 212° | __ | __ | 0000000 | 00000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
| J | 3/4" | 40 | 31/32" | 1 9/32" | Ball Up, Ball Down, Angle | __ | M8 | 1 31/32" | -22° to 128° | __ | __ | 00000000 | 00000 |
| J | 1" | 55 | 1 9/32" | 1 9/16" | Ball Up, Ball Down, Angle | __ | M8 | 1" | -22° to 128° | __ | __ | 00000000 | 00000 |
Black-Oxide Steel Housing | |||||||||||||
| K | 1" | 75 | 1 7/16" | 1" | Ball Up, Ball Down, Angle | __ | 1/4"-20 | 7/16" | Not Rated to 800° | __ | __ | 00000000 | 00000 |
| K | 1" | 75 | 1 7/16" | 1 7/32" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | 32° to 212° | __ | __ | 0000000 | 00000 |
| K | 1 1/4" | 250 | 1 3/4" | 1 1/4" | Ball Up, Ball Down, Angle | __ | 3/8"-16 | 15/16" | Not Rated to 800° | __ | __ | 00000000 | 00000 |
Stainless Steel Housing | |||||||||||||
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 000000 |
| C | 1" | 65 | 1 17/32" | 1 27/32" | Ball Up | __ | 1/4"-20 | 7/8" | 0° to 250° | __ | __ | 0000000 | 00000 |
| C | 1" | 440 | 1 1/4" | 1 1/2" | Ball Up, Ball Down | __ | 5/16"-18 | 3/4" | __ | __ | __ | 00000000 | 000000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 1/4"-20 | 11/16" | 32° to 212° | __ | __ | 0000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 3/8"-16 | 11/16" | Not Rated to 125° | __ | __ | 00000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | __ | 5/16"-18 | 11/16" | 32° to 212° | __ | __ | 0000000 | 00000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | __ | 1/4"-20 | 3/4" | __ | __ | __ | 00000000 | 00000 |
Nylon Plastic Housing | |||||||||||||
| N | 1" | 45 | 1 3/8" | 2 1/16" | Ball Up, Ball Down, Angle | Black | 5/16"-18 | 5/8" | 32° to 212° | __ | __ | 0000000 | 00000 |
Polypropylene Plastic Ball | |||||||||||||
Zinc-Plated Steel Housing | |||||||||||||
| B | 1" | 50 | 1 1/2" | 1 1/2" | Ball Up, Ball Down | __ | 1/4"-20 | 7/8" | 0° to 190° | __ | __ | 00000000 | 00000 |
Washdown Stud-Mount Ball Transfers
A double-sealed ball keeps out dirt and debris, and side vents expel contaminants. With a ball that’s stainless steel, these ball transfers resist corrosion. They also don’t need to be lubricated. They can be used at an angle, so you can use them to build support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Thread Size | Stud Lg. | Temperature Range, °F | Each | |
Stainless Steel Ball | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Nylon Plastic Housing | ||||||||||
| 1" | 525 | 1 3/4" | 2" | Ball Up, Ball Down, Angle | Black | M10 | 1 9/16" | -22° to 128° | 0000000 | 0000000 |
Heavy Duty Stud-Mount Ball Transfers
Steel balls are durable.
Stainless steel balls resist corrosion the best.
Nylon balls are nonmarking.
Ball transfers with an angled working orientation can be used to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Thread Size | Stud Lg. | Each | ||
Steel Ball | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel Housing | |||||||||
| A | 1" | 700 | 2 1/16" | 2" | Ball Up, Ball Down, Angle | 1/2"-20 | 1" | 00000000 | 0000000 |
| A | 1 1/4" | 500 | 1 13/16" | 2" | Ball Up, Ball Down, Angle | M10 | 1 5/8" | 00000000 | 000000 |
| A | 1 1/2" | 1,100 | 2 3/16" | 2 3/8" | Ball Up, Ball Down, Angle | M12 | 2" | 00000000 | 000000 |
| A | 1 1/2" | 2,200 | 2 15/16" | 2 3/8" | Ball Up, Ball Down, Angle | 3/4"-16 | 1 5/8" | 00000000 | 000000 |
| B | 1 3/16" | 700 | 1 7/16" | 1 3/4" | Ball Up, Ball Down, Angle | 3/8"-16 | 1" | 00000000 | 00000 |
| C | 1 3/16" | 700 | 2" | 1 3/4" | Ball Up, Ball Down | 3/8"-16 | 1" | 00000000 | 00000 |
Black-Oxide Steel Housing | |||||||||
| A | 1" | 500 | 1 7/8" | 1 3/4" | Ball Up, Ball Down, Angle | 1/2"-20 | 1" | 0000000 | 000000 |
| D | 1/2" | 100 | 7/8" | 7/8" | Ball Up, Ball Down, Angle | 5/16"-24 | 1" | 0000000 | 00000 |
Painted Steel Housing | |||||||||
| A | 1" | 700 | 2" | 2" | Ball Up, Ball Down, Angle | 1/2"-20 | 1" | 0000000 | 000000 |
| A | 1 1/2" | 2,200 | 2 7/8" | 2 3/8" | Ball Up, Ball Down, Angle | 3/4"-16 | 1 5/8" | 0000000 | 000000 |
| E | 1/2" | 75 | 3/4" | 13/16" | Ball Up, Ball Down, Angle | 5/16"-24 | 5/8" | 0000000 | 000000 |
Stainless Steel Ball | |||||||||
Zinc-Plated Steel Housing | |||||||||
| B | 1 3/16" | 700 | 1 7/16" | 1 3/4" | Ball Up, Ball Down, Angle | 3/8"-16 | 1" | 0000000 | 000000 |
Stainless Steel Housing | |||||||||
| A | 1 1/2" | 500 | 2 3/16" | 2 3/8" | Ball Up, Ball Down, Angle | M12 | 2" | 0000000 | 000000 |
| B | 1 3/16" | 700 | 1 7/16" | 1 3/4" | Ball Up, Ball Down, Angle | 3/8"-16 | 1" | 0000000 | 000000 |
| C | 1" | 500 | 1 1/4" | 1 1/2" | Ball Up, Ball Down | 5/16"-18 | 3/4" | 0000000 | 000000 |
| C | 1 3/16" | 900 | 2" | 1 3/4" | Ball Up, Ball Down | 3/8"-16 | 1" | 0000000 | 000000 |
Nylon Plastic Ball | |||||||||
Zinc-Plated Steel Housing | |||||||||
| C | 1 3/16" | 700 | 2" | 1 3/4" | Ball Up, Ball Down | 3/8"-16 | 1" | 0000000 | 00000 |
Stainless Steel Housing | |||||||||
| C | 1 3/16" | 700 | 2" | 1 3/4" | Ball Up, Ball Down | 3/8"-16 | 1" | 0000000 | 000000 |
Clean Room Stud-Mount Ball Transfers
Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination. These ball transfers were originally developed for the electronics manufacturing industry, where aligning glass layers in monitors and screens must be done without introducing dust. Use them to create conveyors, transfer tables, and material staging areas in your clean room.
Acetal ball transfers are best for light duty applications.
PEEK ball transfers withstand more wear and are more chemical resistant than acetal ball transfers, so they handle more demanding applications.
Vespel® polyimide ball transfers are nonconductive, which means they prevent stray electrical charges from passing between your material and equipment. They're best for moving glass and other material with a polished surface because they're smoother than acetal and PEEK ball transfers and won't scratch surfaces.
Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Size | Pitch, mm | Stud Lg. | Temperature Range, °F | Environmental Rating | Each | |
Acetal Plastic Ball | ||||||||||||
Acetal Plastic Housing | ||||||||||||
| 3/8" | 1 1/2 | 9/16" | 21/32" | Ball Up | White | M8 | 1.25 | 15/32" | 0° to 175° | Fed. Std. Class 1,000 | 0000000 | 000000 |
PEEK Plastic Ball | ||||||||||||
PEEK Plastic/Stainless Steel Housing | ||||||||||||
| 3/8" | 2 1/2 | 9/16" | 19/32" | Ball Up | Beige | M8 | 1.25 | 15/32" | 0° to 260° | Fed. Std. Class 1,000 | 0000000 | 00000 |
Vespel® Polyimide Plastic Ball | ||||||||||||
Vespel® Polyimide Plastic/Stainless Steel Housing | ||||||||||||
| 3/8" | 1 | 9/16" | 19/32" | Ball Up | Brown | M8 | 1.25 | 15/32" | 0° to 200° | Fed. Std. Class 1,000 | 0000000 | 000000 |
Ball Transfers for Delicate Surfaces
A large-diameter nonmarring rubber ball handles delicate or polished surfaces. The ball rotates around the stem and the stem spins. Covers on the wheel bearing and mounting stud keep out dust and debris.
Polyurethane rubber balls are abrasion resistant.
Ball transfers with an angled working orientation can be used to form stock stands.
For technical drawings and 3-D models, click on a part number.
Ball | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Projection | Color | Cap., lbs. | Working Orientation | Thread Size | Stud Lg. | Stem Material | Hardness | Hardness Rating | Temperature Range, °F | Includes | Each | |
Rubber Ball | |||||||||||||
| 1 3/8" | 1 13/16" | Black | 30 | Ball Up, Ball Down, Angle | M14 | 1 21/32" | Zinc-Plated Steel | Durometer 30D | Hard | 0° to 140° | Two Zinc-Plated Steel Locknuts | 00000000 | 000000 |
| 1 31/32" | 2 17/32" | Black | 40 | Ball Up, Ball Down, Angle | M14 | 1 21/32" | Zinc-Plated Steel | Durometer 30D | Hard | 0° to 140° | Two Zinc-Plated Steel Locknuts | 00000000 | 00000 |
Polyurethane Rubber Ball | |||||||||||||
| 1 3/8" | 1 13/16" | Red | 30 | Ball Up, Ball Down, Angle | M14 | 1 21/32" | Zinc-Plated Steel | Durometer 92A | Extra Hard | 0° to 140° | Two Zinc-Plated Steel Locknuts | 00000000 | 00000 |
| 1 31/32" | 2 17/32" | Red | 40 | Ball Up, Ball Down, Angle | M14 | 1 21/32" | Zinc-Plated Steel | Durometer 92A | Extra Hard | 0° to 140° | Two Zinc-Plated Steel Locknuts | 00000000 | 00000 |
Drawbar Rings
These rings mount to a trailer and connect to the drawbar coupler or tow hook on a vehicle to create a towing connection. Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) represents the weight of the load on the drawbar ring.
Note: Capacity is reduced 25% in off-road use.
For technical drawings and 3-D models, click on a part number.
Overall | Ring | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. Trailer Wt., lbs. | Vertical Capacity, lbs. | Dp. | Material | ID | Thick. | Stud Length | Size | Length | Each | |
Threaded Stud | |||||||||||
| 3 | 15,000 | 3,000 | 9 1/8" | Steel | 2 1/2" | 1 1/2" | 3 1/4" | 1 1/2"-6 | 1 3/4" | 00000000 | 0000000 |