Stud-Mount Ball Transfers
Install these ball transfers in a threaded hole or use a nut to secure.
Steel balls are durable. Stainless steel balls offer the most corrosion resistance. Nylon and polypropylene balls are nonmarking. Nylon is stronger than polypropylene. However, polypropylene resists chemicals better than nylon.
Ball transfers with an angled working orientation can be used to form support stands.
Capacity is given for the ball up orientation. Using these ball transfers in a ball down or angled orientation could reduce the capacity stated.
For technical drawings and 3-D models, click on a part number.
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Thread Size  | Stud Lg. | Temperature Range, °F | Each | ||
Steel Ball | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel Housing | ||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | 1/4"-20 | 3/4" | __ | 0000000 | 00000 |
| B | 1" | 150 | 1 3/8" | 1 1/2" | Ball Up, Ball Down | 1/4"-20 | 23/32" | __ | 00000000 | 00000 |
| B | 1" | 150 | 1 1/2" | 1 1/2" | Ball Up, Ball Down | 1/4"-20 | 7/8" | __ | 00000000 | 00000 |
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
| C | 1" | 65 | 1 9/16" | 1 7/8" | Ball Up | 1/4"-20 | 7/8" | __ | 0000000 | 0000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | 1/4"-20 | 11/16" | __ | 0000000 | 0000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
Black-Oxide Steel Housing | ||||||||||
| J | 1" | 150 | 1 7/16" | 1 7/32" | Ball Up, Ball Down, Angle | 1/4"-20 | 13/32" | __ | 0000000 | 00000 |
Stainless Steel Ball | ||||||||||
Zinc-Plated Steel Housing | ||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
Stainless Steel Housing | ||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
| B | 1" | 150 | 1 3/8" | 1 1/2" | Ball Up, Ball Down | 1/4"-20 | 23/32" | __ | 00000000 | 00000 |
| C | 5/8" | 200 | 53/64" | 15/16" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 000000 |
| C | 1" | 100 | 1 17/32" | 1 27/32" | Ball Up | 1/4"-20 | 7/8" | __ | 0000000 | 00000 |
| D | 1" | 125 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | 1/4"-20 | 11/16" | __ | 0000000 | 00000 |
| E | 1/2" | 100 | 11/16" | 7/8" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
Nylon Plastic Ball | ||||||||||
Zinc-Plated Steel Housing | ||||||||||
| A | 5/8" | 125 | 13/16" | 15/16" | Ball Up, Ball Down, Angle | 1/4"-20 | 3/4" | 32° to 212° | 0000000 | 00000 |
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
| C | 1" | 65 | 1 17/32" | 1 27/32" | Ball Up | 1/4"-20 | 7/8" | 0° to 250° | 0000000 | 0000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | 1/4"-20 | 11/16" | 32° to 212° | 0000000 | 00000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
Black-Oxide Steel Housing | ||||||||||
| J | 1" | 75 | 1 7/16" | 1" | Ball Up, Ball Down, Angle | 1/4"-20 | 7/16" | Not Rated to 800° | 00000000 | 00000 |
Stainless Steel Housing | ||||||||||
| C | 5/8" | 130 | 53/64" | 15/16" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 000000 |
| C | 1" | 65 | 1 17/32" | 1 27/32" | Ball Up | 1/4"-20 | 7/8" | 0° to 250° | 0000000 | 00000 |
| D | 1" | 75 | 1 3/8" | 1 3/4" | Ball Up, Ball Down | 1/4"-20 | 11/16" | 32° to 212° | 0000000 | 00000 |
| E | 1/2" | 65 | 11/16" | 7/8" | Ball Up, Ball Down | 1/4"-20 | 3/4" | __ | 00000000 | 00000 |
Polypropylene Plastic Ball | ||||||||||
Zinc-Plated Steel Housing | ||||||||||
| B | 1" | 50 | 1 1/2" | 1 1/2" | Ball Up, Ball Down | 1/4"-20 | 7/8" | 0° to 190° | 00000000 | 00000 |
Multidirectional Flow Rails
Rotate materials in any direction on these flow rails. Use them to convey packages and pallets in flow racks, assembly areas, and confined spaces.
Ball transfers rotate to accommodate changes in direction.
Threaded-stud-mount ball transfers are attached to the rail with a stud and nut.
Note: Capacities are based on a fully supported rail.
For technical drawings and 3-D models, click on a part number.
Ball | O'all | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Spacing | Dia. | Projection | Material | Material | Cap. per Ball, lbs. | Wd. | Ht. | Thread Size | Frame Wd. | Each | |
5 ft. Lg. | |||||||||||
Threaded-Stud Mount | |||||||||||
| 3" | 1" | 1 1/2" | Steel | Zinc-Plated Steel | 65 | 2 1/2" | 2 1/2" | 1/4"-20 | 2 1/2" | 0000000 | 0000000 |
| 4" | 1" | 1 1/2" | Steel | Zinc-Plated Steel | 65 | 2 1/2" | 2 1/2" | 1/4"-20 | 2 1/2" | 0000000 | 000000 |
10 ft. Lg. | |||||||||||
Threaded-Stud Mount | |||||||||||
| 3" | 1" | 1 1/2" | Steel | Zinc-Plated Steel | 65 | 2 1/2" | 2 1/2" | 1/4"-20 | 2 1/2" | 0000000 | 000000 |
| 4" | 1" | 1 1/2" | Steel | Zinc-Plated Steel | 65 | 2 1/2" | 2 1/2" | 1/4"-20 | 2 1/2" | 0000000 | 000000 |