Filter by
Thread Size
Locking Type
Drive Style
Thread Type
Thread Spacing
DFARS Compliance
Slotted Ball-Nose Spring Plungers
Without Thread Locker
With Thread Locker
Install these spring plungers with a screwdriver—they're slotted on one or both ends. The ball nose rolls to minimize wear and allow parts to move in and out of position.
Steel is strong and wear resistant.
440C stainless steel is hard, wear resistant, and mildly chemical resistant.
316 stainless steel is more corrosion resistant than 440C and 18-8 stainless steel and can be used in saltwater environments.
18-8 stainless steel is chemical resistant.
Brass is corrosion resistant in wet environments; brass noses are soft to minimize marring.
Plastic is chemical resistant and lightweight; nylon noses are extra soft to minimize marring soft surfaces such as aluminum.
Spring plungers without thread locker are for use in soft material such as aluminum, in extreme temperatures, and on parts requiring frequent assembly and removal.
Spring plungers with thread locker have a locking element that adds friction to resist loosening.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Inch
Nose | Nose Force, lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Body Lg. | Extended Lg. | Dia. | Temp. Range, °F | Extended | Compressed | Choose a Locking Type | Each | |
Steel Body and 440C Stainless Steel Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | __ | 0.1 | 0.5 | 0000000 | 00000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | __ | 0.3 | 0.8 | 0000000 | 0000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | __ | 0.5 | 1 | 0000000 | 0000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 10-24 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 0.5 | 1.5 | 000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 1.5 | 3 | 0000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 2 | 4 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 3 | 7 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 0000000 | 0000 | |
| 1/4"-28 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 2 | 4.5 | 0000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 4 | 9 | 0000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 0000000 | 0000 | |
| 5/16"-24 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 2.5 | 5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 5 | 10 | 000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 6 | 21 | 0000000 | 0000 | |
| 3/8"-24 | 0.625" | 0.048" | 0.188" | __ | 6 | 21 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 3 | 6 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 12 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 0000000 | 0000 | |
| 1/2"-20 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 00000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 4.5 | 9 | 0000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 7 | 50 | 0000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 9 | 18 | 0000000 | 0000 | |
Steel Body and Nylon Plastic Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | -20° to 180° | 0.1 | 0.5 | 00000000 | 0000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | -20° to 180° | 0.3 | 0.8 | 00000000 | 0000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | -20° to 180° | 0.5 | 1 | 00000000 | 0000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.3 | 00000000 | 0000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.3 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.5 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 1.5 | 3 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 2 | 5 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 2 | 4 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 3 | 7 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 4 | 12 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 2 | 4.5 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 4 | 9 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 6 | 17 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 2.5 | 5 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 5 | 10 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 6 | 21 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 3 | 6 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 6 | 12 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 6 | 30 | 00000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 4.5 | 9 | 00000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 7 | 50 | 00000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 9 | 18 | 00000000 | 0000 | |
316 Stainless Steel Body and 316 Stainless Steel Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | __ | 0.1 | 0.5 | 0000000 | 00000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | __ | 0.3 | 0.8 | 0000000 | 00000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | __ | 0.5 | 1 | 0000000 | 00000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 00000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 00000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 1.5 | 3 | 0000000 | 00000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 0000000 | 00000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 2 | 4 | 0000000 | 00000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 0000000 | 00000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 0000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 5 | 10 | 0000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 7 | 50 | 0000000 | 00000 | |
18-8 Stainless Steel Body and 440C Stainless Steel Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | __ | 0.1 | 0.5 | 0000000 | 0000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | __ | 0.3 | 0.8 | 0000000 | 0000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | __ | 0.5 | 1 | 000000 | 0000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 10-24 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 0.5 | 1.5 | 0000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 1.5 | 3 | 0000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 2 | 4 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 3 | 7 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 0000000 | 0000 | |
| 1/4"-28 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 2 | 4.5 | 0000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 4 | 9 | 000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 000000 | 0000 | |
| 5/16"-24 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 00000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 2.5 | 5 | 000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 5 | 10 | 000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 6 | 21 | 000000 | 0000 | |
| 3/8"-24 | 0.625" | 0.048" | 0.188" | __ | 6 | 21 | 00000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 3 | 6 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 12 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 0000000 | 0000 | |
| 1/2"-20 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 00000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 4.5 | 9 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 7 | 50 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 9 | 18 | 0000000 | 00000 | |
18-8 Stainless Steel Body and Nylon Plastic Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | -20° to 180° | 0.1 | 0.5 | 00000000 | 0000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | -20° to 180° | 0.3 | 0.8 | 00000000 | 0000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | -20° to 180° | 0.5 | 1 | 00000000 | 0000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.3 | 0000000 | 0000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.3 | 00000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 0.5 | 1.5 | 00000000 | 00000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 1.5 | 3 | 00000000 | 00000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | -20° to 180° | 2 | 5 | 00000000 | 00000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 2 | 4 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 3 | 7 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | -20° to 180° | 4 | 12 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 2 | 4.5 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 4 | 9 | 00000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | -20° to 180° | 6 | 17 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 2.5 | 5 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 5 | 10 | 00000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | -20° to 180° | 6 | 21 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 3 | 6 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 6 | 12 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | -20° to 180° | 6 | 30 | 0000000 | 0000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 4.5 | 9 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 7 | 50 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | -20° to 180° | 9 | 18 | 0000000 | 00000 | |
Brass Body and Brass Nose | |||||||||
| 4-48 | 0.187" | 0.02" | 0.062" | __ | 0.1 | 0.5 | 0000000 | 0000 | |
| 5-40 | 0.25" | 0.02" | 0.062" | __ | 0.3 | 0.8 | 0000000 | 0000 | |
| 6-40 | 0.312" | 0.023" | 0.078" | __ | 0.5 | 1 | 0000000 | 0000 | |
| 8-32 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 8-36 | 0.344" | 0.025" | 0.094" | __ | 0.5 | 1.3 | 0000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 1.5 | 3 | 0000000 | 0000 | |
| 10-32 | 0.513" | 0.025" | 0.094" | __ | 2 | 5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 2 | 4 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.035" | 1/8" | __ | 4 | 12 | 0000000 | 0000 | |
| 5/16"-18 | 0.578" | 0.04" | 0.156" | __ | 6 | 17 | 0000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.048" | 0.188" | __ | 5 | 10 | 0000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.072" | 0.281" | __ | 6 | 30 | 0000000 | 00000 | |
| 5/8"-11 | 0.984" | 0.096" | 3/8" | __ | 7 | 50 | 0000000 | 00000 | |
Acetal Plastic Body and 440C Stainless Steel Nose | |||||||||
| 1/4"-20 | 0.531" | 0.03" | 1/8" | __ | 1 | 2.5 | Without Thread Locker | 00000000 | 0000 |
| 1/4"-20 | 0.531" | 0.03" | 1/8" | __ | 2 | 5 | Without Thread Locker | 00000000 | 0000 |
| 5/16"-18 | 0.578" | 0.039" | 0.156" | __ | 2 | 4.5 | Without Thread Locker | 00000000 | 0000 |
| 5/16"-18 | 0.578" | 0.039" | 0.156" | __ | 4 | 9 | Without Thread Locker | 00000000 | 0000 |
| 3/8"-16 | 0.625" | 0.053" | 0.187" | __ | 2.5 | 5 | Without Thread Locker | 00000000 | 0000 |
| 3/8"-16 | 0.625" | 0.053" | 0.187" | __ | 5 | 10 | Without Thread Locker | 00000000 | 0000 |
Acetal Plastic Body and Nylon Plastic Nose | |||||||||
| 1/4"-20 | 0.531" | 0.03" | 1/8" | -20° to 180° | 1 | 2.5 | Without Thread Locker | 00000000 | 0000 |
| 1/4"-20 | 0.531" | 0.03" | 1/8" | -20° to 180° | 2 | 5 | Without Thread Locker | 00000000 | 0000 |
| 5/16"-18 | 0.578" | 0.039" | 0.156" | -20° to 180° | 2 | 4.5 | Without Thread Locker | 00000000 | 0000 |
| 5/16"-18 | 0.578" | 0.039" | 0.156" | -20° to 180° | 4 | 9 | Without Thread Locker | 00000000 | 0000 |
| 3/8"-16 | 0.625" | 0.053" | 0.187" | -20° to 180° | 2.5 | 5 | Without Thread Locker | 00000000 | 0000 |
| 3/8"-16 | 0.625" | 0.053" | 0.187" | -20° to 180° | 5 | 10 | Without Thread Locker | 00000000 | 0000 |
Metric
Thread | Nose | Nose Force, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Body Lg., mm | Extended Lg., mm | Dia., mm | Min. Temp., °F | Max. Temp., °F | Extended | Compressed | Choose a Locking Type | Each | |
Steel Body and 440C Stainless Steel Nose | |||||||||||
| M3 | 0.5 | 7 | 0.4 | 1.5 | __ | __ | 0.7 | 1 | 0000000 | 00000 | |
| M4 | 0.7 | 9 | 0.8 | 2.5 | __ | __ | 0.9 | 2.3 | 0000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | __ | __ | 1.8 | 3.2 | 0000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | __ | __ | 3.4 | 5 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 0.5 | 1.4 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 2 | 2.9 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 6.3 | 9 | 0000000 | 0000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 1.1 | 2.3 | 0000000 | 0000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 3.4 | 6.7 | 0000000 | 0000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 9 | 13.4 | 0000000 | 0000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 1.8 | 3.4 | 0000000 | 0000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 4.5 | 7.8 | 0000000 | 0000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 13.4 | 20 | 0000000 | 0000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 2.3 | 4.5 | 0000000 | 0000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 6.7 | 12.3 | 0000000 | 0000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 16.8 | 25.7 | 0000000 | 0000 | |
| M16 | 2 | 24 | 3.5 | 10 | __ | __ | 9.2 | 19.3 | 0000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | __ | __ | 15.3 | 32 | 0000000 | 00000 | |
| M16 | 2 | 25.4 | 2.4 | 9.5 | __ | __ | 4.4 | 8.8 | 0000000 | 00000 | |
Steel Body and Nylon Plastic Nose | |||||||||||
| M3 | 0.5 | 7 | 0.4 | 1.5 | -20° | 180° | 0.7 | 1 | 0000000 | 0000 | |
| M4 | 0.7 | 9 | 0.8 | 2.5 | Not Rated | 200° | 0.9 | 2.3 | 0000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | -20° | 180° | 1.8 | 3.2 | 0000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | -20° | 180° | 3.4 | 5 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 0.5 | 1.4 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 2 | 2.9 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 6.3 | 9 | 0000000 | 0000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 1.1 | 2.3 | 0000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 3.4 | 6.7 | 0000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 9 | 13.4 | 0000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 1.8 | 3.4 | 0000000 | 0000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 4.5 | 7.8 | 0000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 13.4 | 20 | 0000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 2.3 | 4.5 | 0000000 | 0000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 6.7 | 12.3 | 0000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 16.8 | 25.7 | 0000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | -20° | 180° | 9.2 | 19.3 | 0000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | -20° | 180° | 15.3 | 32 | 0000000 | 00000 | |
18-8 Stainless Steel Body and 440C Stainless Steel Nose | |||||||||||
| M3 | 0.5 | 7 | 0.4 | 1.5 | __ | __ | 0.7 | 1 | 00000000 | 00000 | |
| M4 | 0.7 | 9 | 0.8 | 2.5 | __ | __ | 0.9 | 2.3 | 00000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | __ | __ | 1.8 | 3.2 | 00000000 | 00000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | __ | __ | 3.4 | 5 | 00000000 | 00000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 0.5 | 1.4 | 00000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 2 | 2.9 | 00000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | __ | __ | 6.3 | 9 | 00000000 | 0000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 1.1 | 2.3 | 00000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 3.4 | 6.7 | 00000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | __ | __ | 9 | 13.4 | 00000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 1.8 | 3.4 | 00000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 4.5 | 7.8 | 00000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | __ | __ | 13.4 | 20 | 00000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 2.3 | 4.5 | 00000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 6.7 | 12.3 | 00000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | __ | __ | 16.8 | 25.7 | 00000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | __ | __ | 9.2 | 19.3 | 00000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | __ | __ | 15.3 | 32 | 00000000 | 00000 | |
| M16 | 2 | 25.4 | 2.4 | 9.5 | __ | __ | 4.4 | 8.8 | 00000000 | 00000 | |
18-8 Stainless Steel Body and Nylon Plastic Nose | |||||||||||
| M3 | 0.5 | 7 | 0.4 | 1.5 | -20° | 180° | 0.7 | 1 | 0000000 | 0000 | |
| M4 | 0.7 | 9 | 0.8 | 2.5 | Not Rated | 200° | 0.9 | 2.3 | 0000000 | 00000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | -20° | 180° | 1.8 | 3.2 | 0000000 | 0000 | |
| M5 | 0.8 | 12 | 0.9 | 3.5 | -20° | 180° | 3.4 | 5 | 0000000 | 0000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 0.5 | 1.4 | 0000000 | 00000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 2 | 2.9 | 0000000 | 00000 | |
| M6 | 1 | 14 | 1 | 3.5 | Not Rated | 200° | 6.3 | 9 | 0000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 1.1 | 2.3 | 0000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 3.4 | 6.7 | 0000000 | 00000 | |
| M8 | 1.25 | 16 | 1.5 | 5 | Not Rated | 200° | 9 | 13.4 | 0000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 1.8 | 3.4 | 0000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 4.5 | 7.8 | 0000000 | 00000 | |
| M10 | 1.5 | 19 | 2 | 6 | Not Rated | 200° | 13.4 | 20 | 0000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 2.3 | 4.5 | 0000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 6.7 | 12.3 | 0000000 | 00000 | |
| M12 | 1.75 | 22 | 2.5 | 8 | Not Rated | 200° | 16.8 | 25.7 | 0000000 | 00000 | |
| M16 | 2 | 24 | 3.5 | 10 | -20° | 180° | 9.2 | 19.3 | 0000000 | 0000 | |
| M16 | 2 | 24 | 3.5 | 10 | -20° | 180° | 15.3 | 32 | 0000000 | 0000 | |
Slotted Long-Nose Spring Plungers
With Thread Locker
Without Thread Locker
Slotted on both ends for installation with a screwdriver. With a nose that is longer than a ball-nose, these provide a large bearing surface to handle side loads.
Steel is strong and wear resistant. Zinc-plated steel bodies resist corrosion in wet environments. Black-oxide steel bodies resist corrosion in dry environments.
316 stainless steel is more corrosion resistant than 18-8 stainless steel and can be used in saltwater environments.
18-8 stainless steel is chemical resistant.
Brass is corrosion resistant in wet environments; brass noses are soft to minimize marring.
Plastic is chemical resistant and lightweight; acetal noses are extra soft to minimize marring soft surfaces such as aluminum.
Spring plungers without thread locker are for use in soft material such as aluminum, in extreme temperatures, and on parts requiring frequent assembly and removal.
Spring plungers with thread locker have a locking element that adds friction to resist loosening.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Inch
Nose | Nose Force, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Body Lg. | Extended Lg. | Dia. | Min. Temp., °F | Max. Temp., °F | Extended | Compressed | Choose a Locking Type | Each | |
Zinc-Plated Steel Body and Steel Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 0000000 | 00000 | |
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 0.8 | 2.5 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 1.8 | 6.3 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 1 | 3.5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 3 | 10.5 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 1.3 | 4 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 3.8 | 15.5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 1.5 | 5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 4.5 | 18.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 1.8 | 5.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 5 | 28 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 2 | 8.5 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 7 | 50 | 0000000 | 0000 | |
Zinc-Plated Steel Body and 18-8 Stainless Steel Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 0000000 | 0000 | |
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 0.8 | 2.5 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 1.8 | 6.3 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 1 | 3.5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 3 | 10.5 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 1.3 | 4 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 3.8 | 15.5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 1.5 | 5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 4.5 | 18.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 1.8 | 5.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 5 | 28 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 2 | 8.5 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 7 | 50 | 0000000 | 0000 | |
Zinc-Plated Steel Body and Acetal Plastic Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | -40° | 190° | 0.5 | 1.5 | 0000000 | 0000 | |
| 8-32 | 0.437" | 0.052" | 0.07" | -40° | 190° | 1.5 | 4.8 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | -40° | 190° | 0.5 | 1.5 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | -40° | 190° | 1.5 | 4.8 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | -40° | 190° | 0.8 | 2.5 | 0000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | -40° | 190° | 1.8 | 6.3 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | -40° | 190° | 1 | 3.5 | 0000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | -40° | 190° | 3 | 10.5 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | -40° | 190° | 1.3 | 4 | 0000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | -40° | 190° | 3.8 | 15.5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | -40° | 190° | 1.5 | 5 | 0000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | -40° | 190° | 4.5 | 18.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | -40° | 190° | 1.8 | 5.5 | 0000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | -40° | 190° | 5 | 28 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | -40° | 190° | 2 | 8.5 | 0000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | -40° | 190° | 7 | 50 | 0000000 | 0000 | |
Black-Oxide Steel Body and Steel Nose | ||||||||||
| 6-32 | 0.375" | 0.036" | 0.046" | __ | __ | 0.5 | 1.5 | Thread Locker | 0000000 | 0000 |
| 8-32 | 0.437" | 0.093" | 0.07" | __ | __ | 1 | 3.3 | 00000000 | 0000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | __ | __ | 0.5 | 2 | 0000000 | 0000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | __ | __ | 0.5 | 4 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.093" | 0.07" | __ | __ | 1 | 3.3 | 00000000 | 0000 | |
| 10-32 | 0.469" | 0.125" | 0.093" | __ | __ | 1.3 | 4.3 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.187" | 0.119" | __ | __ | 2 | 7 | 00000000 | 0000 | |
| 5/16"-18 | 0.563" | 0.084" | 0.135" | __ | __ | 1.5 | 4 | Thread Locker | 0000000 | 00000 |
| 5/16"-18 | 0.563" | 0.187" | 0.135" | __ | __ | 2 | 9 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.187" | 0.186" | __ | __ | 3 | 12.5 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.25" | 0.248" | __ | __ | 3.5 | 19 | 00000000 | 0000 | |
| 5/8"-11 | 1.063" | 0.312" | 0.31" | __ | __ | 4.5 | 33.5 | 00000000 | 0000 | |
Black-Oxide Steel Body and Acetal Plastic Nose | ||||||||||
| 6-32 | 0.375" | 0.036" | 0.046" | Not Rated | 200° | 0.5 | 1.5 | Thread Locker | 0000000 | 0000 |
| 8-32 | 0.437" | 0.093" | 0.07" | -30° | 190° | 1 | 3.3 | 00000000 | 0000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | Not Rated | Not Rated | 0.5 | 2 | 0000000 | 00000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | Not Rated | Not Rated | 0.5 | 4 | 0000000 | 0000 | |
| 8-36 | 0.437" | 0.093" | 0.07" | -30° | 190° | 1 | 3.3 | 00000000 | 0000 | |
| 10-32 | 0.469" | 0.125" | 0.093" | -30° | 190° | 1.3 | 4.3 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.187" | 0.119" | -30° | 190° | 2 | 7 | 00000000 | 0000 | |
| 5/16"-18 | 0.563" | 0.084" | 0.135" | Not Rated | 200° | 1.5 | 4 | Thread Locker | 0000000 | 0000 |
| 5/16"-18 | 0.563" | 0.187" | 0.135" | -30° | 190° | 2 | 9 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.187" | 0.186" | -30° | 190° | 3 | 12.5 | 00000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.25" | 0.248" | -30° | 190° | 3.5 | 19 | 00000000 | 0000 | |
| 5/8"-11 | 1.063" | 0.312" | 0.31" | -30° | 190° | 4.5 | 33.5 | 00000000 | 0000 | |
316 Stainless Steel Body and 316 Stainless Steel Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.7 | 0000000 | 00000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | __ | __ | 0.5 | 2 | 0000000 | 00000 | |
| 10-32 | 0.469" | 0.065" | 0.09" | __ | __ | 1.7 | 6.2 | 0000000 | 00000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 3 | 10.5 | 0000000 | 00000 | |
| 5/16"-18 | 0.563" | 0.084" | 0.135" | __ | __ | 1.5 | 4 | 0000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 4.5 | 18.5 | 0000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 5 | 28.5 | 0000000 | 00000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 7 | 50 | 0000000 | 00000 | |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 00000000 | 0000 | |
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 00000000 | 0000 | |
| 8-32 | 0.437" | 0.093" | 0.07" | __ | __ | 1 | 3.3 | 00000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 0.5 | 1.5 | 00000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.8 | 00000000 | 0000 | |
| 8-36 | 0.437" | 0.093" | 0.07" | __ | __ | 1 | 3.3 | 00000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 0.8 | 2.5 | 00000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | __ | __ | 1.8 | 6.3 | 00000000 | 0000 | |
| 10-32 | 0.469" | 0.125" | 0.093" | __ | __ | 1.3 | 4.3 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 1 | 3.5 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 3 | 10.5 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.187" | 0.119" | __ | __ | 2 | 7 | 00000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 1.3 | 4 | 00000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | __ | __ | 3.8 | 15.5 | 00000000 | 0000 | |
| 5/16"-18 | 0.563" | 0.187" | 0.135" | __ | __ | 2 | 9 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 1.5 | 5 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 4.5 | 18.5 | 00000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.187" | 0.186" | __ | __ | 3 | 12.5 | 00000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 1.8 | 5.5 | 00000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 5 | 28 | 00000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.25" | 0.248" | __ | __ | 3.5 | 19 | 00000000 | 00000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 2 | 8.5 | 00000000 | 00000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 7 | 50 | 00000000 | 00000 | |
18-8 Stainless Steel Body and Acetal Plastic Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | -40° | 190° | 0.5 | 1.5 | 00000000 | 0000 | |
| 8-32 | 0.437" | 0.052" | 0.07" | -40° | 190° | 1.5 | 4.8 | 00000000 | 0000 | |
| 8-32 | 0.437" | 0.093" | 0.07" | -30° | 190° | 1 | 3.3 | 000000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | -40° | 190° | 0.5 | 1.5 | 00000000 | 0000 | |
| 8-36 | 0.437" | 0.052" | 0.07" | -40° | 190° | 1.5 | 4.8 | 00000000 | 0000 | |
| 8-36 | 0.437" | 0.093" | 0.07" | -30° | 190° | 1 | 3.3 | 000000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | -40° | 190° | 0.8 | 2.5 | 00000000 | 0000 | |
| 10-32 | 0.468" | 0.065" | 0.093" | -40° | 190° | 1.8 | 6.3 | 00000000 | 0000 | |
| 10-32 | 0.469" | 0.125" | 0.093" | -30° | 190° | 1.3 | 4.3 | 000000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | -40° | 190° | 1 | 3.5 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | -40° | 190° | 3 | 10.5 | 00000000 | 0000 | |
| 1/4"-20 | 0.531" | 0.187" | 0.119" | -30° | 190° | 2 | 7 | 000000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | -40° | 190° | 1.3 | 4 | 00000000 | 0000 | |
| 5/16"-18 | 0.562" | 0.084" | 0.135" | -40° | 190° | 3.8 | 15.5 | 000000000 | 0000 | |
| 5/16"-18 | 0.563" | 0.187" | 0.135" | -30° | 190° | 2 | 9 | 000000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | -40° | 190° | 1.5 | 5 | 000000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | -40° | 190° | 4.5 | 18.5 | 000000000 | 0000 | |
| 3/8"-16 | 0.625" | 0.187" | 0.186" | -30° | 190° | 3 | 12.5 | 000000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | -40° | 190° | 1.8 | 5.5 | 000000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | -40° | 190° | 5 | 28 | 000000000 | 0000 | |
| 1/2"-13 | 0.75" | 0.25" | 0.248" | -30° | 190° | 3.5 | 19 | 000000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | -40° | 190° | 2 | 8.5 | 000000000 | 0000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | -40° | 190° | 7 | 50 | 000000000 | 0000 | |
Brass Body and Brass Nose | ||||||||||
| 8-32 | 0.437" | 0.052" | 0.07" | __ | __ | 1.5 | 4.7 | 0000000 | 00000 | |
| 8-32 | 0.5" | 0.094" | 0.07" | __ | __ | 0.5 | 2 | 0000000 | 00000 | |
| 10-32 | 0.469" | 0.065" | 0.09" | __ | __ | 1.7 | 6.2 | 0000000 | 00000 | |
| 1/4"-20 | 0.531" | 0.078" | 0.119" | __ | __ | 3 | 10.5 | 0000000 | 00000 | |
| 5/16"-18 | 0.563" | 0.084" | 0.135" | __ | __ | 1.5 | 4 | 0000000 | 00000 | |
| 3/8"-16 | 0.625" | 0.11" | 0.186" | __ | __ | 4.5 | 18.5 | 0000000 | 00000 | |
| 1/2"-13 | 0.75" | 0.151" | 0.248" | __ | __ | 5 | 28.5 | 0000000 | 00000 | |
| 5/8"-11 | 1.062" | 0.215" | 0.31" | __ | __ | 7 | 50 | 0000000 | 00000 | |