Ceiling-Mount Foldaway Ladders
Access roofs, commercial attics, and mezzanines from inside with these ceiling-mount ladders. When not in use, they fold up for a flush fit with the ceiling surface. Gas springs make it easy to open and close the ladder. Steps are serrated for maximum slip resistance. Cut the ladder on site to the required height. For the ladder to open and close properly, allow a minimum clearance of 91".
Add suspension kits and ladder extensions when mounting the ladder to a suspended ceiling. Suspension kits connect the foldaway ladder to the roof above, providing structural support and preventing side-to-side movement. Ladder extensions connect to the top of the foldaway ladder so you can climb from the suspended ceiling to a roof hatch. They have retractable grab posts that extend up through the roof hatch for you to safely climb onto the roof.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For Ceiling | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Opening Wd. | Opening Lg. | Max. Climbing Ht. | Ladder Wd. | No. of Steps | Step Tread | Mounting Hardware Included | Specifications Met | Each | |
Aluminum  | ||||||||||
330-lb. Capacity | ||||||||||
| 7'-14' | 31" | 64" | 14' | 23 3/4" | 15 | Serrated | No | OSHA Compliant 29 CFR 1910.23 | 0000000 | 000000000 |
Telescoping Multifunction Ladders
These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands. When used as scaffolding stands, 12" wide planks (not included) must be placed 3 feet from the ladder base.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Scaffold brackets (sold separately) are required to use these ladders as scaffolding stands.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed when used as a straight ladder.
Step | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Ht. (Ladder Configuration) | Overall Wd. | No. of Steps | Material | Tread | Wheel Configuration | Specifications Met | Each | |
Aluminum | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 6 ft.-11 ft. (Step), 13 ft.-23 ft. (Straight), 6 ft. (Scaffold) | 29" | 22 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | ||||||||
| 4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold) | 24" | 14 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 10 ft.-18 ft. (Straight), 5 ft. (Scaffold) | 27" | 18 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
Fiberglass | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 3 ft.-5 ft. (Step), 6 ft.-10 ft. (Straight), 3 ft. (Scaffold) | 29" | 10 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 11 ft.-19 ft. (Straight), 5 ft. (Scaffold) | 29" | 18 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| Scaffold Brackets for Fiberglass Ladders | 0000000 | Pair | 000000 |
Telescoping Extension Ladders
Get multiple heights in one ladder—these ladders extend and lock in 1-ft. increments to give you the exact height you need. When closed, they're small enough to fit in a job bag for easy transport and compact storage. To close, pinch tabs on the second rung to release the locking mechanism, and then slide each section down one by one.
ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders. Type 1 ladders are tested to hold up to 250 lbs. Type 1A ladders are tested to hold up to 300 lbs.
Note: Check local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.
Rope Ladders
Locking
Snap Hooks
Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight so you can easily carry them anywhere.
Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.
Overall | Hook | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., ft. | Wd. | Max. Climbing Ht. | Cap., lbs. | Wt., lbs. | Rope Dia. | Loop ID | ID | Ht. | No.of Steps | Material | Tread | Each | |
Nylon Rope | |||||||||||||
With Loop Ends | |||||||||||||
| 10 | 15" | 10' | 300 | 10 | 5/8" | 3" | __ | __ | 10 | Wood | Smooth | 0000000 | 0000000 |
| 12 | 15" | 12' | 300 | 12 | 5/8" | 3" | __ | __ | 12 | Wood | Smooth | 0000000 | 000000 |
| 15 | 15" | 15' | 300 | 15 | 5/8" | 3" | __ | __ | 15 | Wood | Smooth | 0000000 | 000000 |
| 20 | 15" | 20' | 300 | 20 | 5/8" | 3" | __ | __ | 20 | Wood | Smooth | 0000000 | 000000 |
| 25 | 15" | 25' | 300 | 25 | 5/8" | 3" | __ | __ | 25 | Wood | Smooth | 0000000 | 000000 |
| 30 | 15" | 30' | 300 | 30 | 5/8" | 3" | __ | __ | 30 | Wood | Smooth | 0000000 | 000000 |
| 40 | 15" | 40' | 300 | 40 | 5/8" | 3" | __ | __ | 40 | Wood | Smooth | 0000000 | 000000 |
| 50 | 15" | 50' | 300 | 50 | 5/8" | 3" | __ | __ | 50 | Wood | Smooth | 0000000 | 000000 |
With Locking Snap Hooks | |||||||||||||
| 10 | 15" | 10' | 300 | 10 | 5/8" | __ | 1" | 5 3/4" | 10 | Wood | Smooth | 0000000 | 000000 |
| 12 | 15" | 12' | 300 | 12 | 5/8" | __ | 1" | 5 3/4" | 12 | Wood | Smooth | 0000000 | 000000 |
| 15 | 15" | 15' | 300 | 15 | 5/8" | __ | 1" | 5 3/4" | 15 | Wood | Smooth | 0000000 | 000000 |
| 20 | 15" | 20' | 300 | 20 | 5/8" | __ | 1" | 5 3/4" | 20 | Wood | Smooth | 0000000 | 000000 |
| 25 | 15" | 25' | 300 | 25 | 5/8" | __ | 1" | 5 3/4" | 25 | Wood | Smooth | 0000000 | 000000 |
| 30 | 15" | 30' | 300 | 30 | 5/8" | __ | 1" | 5 3/4" | 30 | Wood | Smooth | 0000000 | 000000 |
| 40 | 15" | 40' | 300 | 40 | 5/8" | __ | 1" | 5 3/4" | 40 | Wood | Smooth | 0000000 | 000000 |
| 50 | 15" | 50' | 300 | 50 | 5/8" | __ | 1" | 5 3/4" | 50 | Wood | Smooth | 0000000 | 000000 |