About Plastic
More
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Tubes
- Color: White or Black
- Temperature Range:
6" Lengths: 0° to 180° F
All other sizes: -20° to 180° F - Tensile Strength: 7,690 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: See table
Easy to machine to close tolerances, these dimensionally stable tubes resist expanding when exposed to heat and moisture. They have a naturally slippery surface along with excellent wear resistance. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
Tubes with an oversized OD also have an undersized ID for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Tight-Tolerance Tubes
White | |||||||
|---|---|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Specifications Met | Lengths, ft. | Per Ft. | |
1/32" Wall Thick. (-0.01" to 0.01") | |||||||
| 1/8" | -0.010" to 0.010" | 1/16" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 3/16" | -0.010" to 0.010" | 1/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/16" Wall Thick. (-0.01" to 0.01") | |||||||
| 1/4" | -0.010" to 0.010" | 1/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 3/8" | -0.010" to 0.010" | 1/4" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1/2" | -0.010" to 0.010" | 3/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 5/8" | -0.010" to 0.010" | 1/2" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 3/4" | -0.010" to 0.010" | 5/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 7/8" | -0.010" to 0.010" | 3/4" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/8" Wall Thick. (-0.01" to 0.01") | |||||||
| 5/8" | -0.010" to 0.010" | 3/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 3/4" | -0.010" to 0.010" | 1/2" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 7/8" | -0.010" to 0.010" | 5/8" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1" | -0.010" to 0.010" | 3/4" | -0.010" to 0.010" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
Oversized Tubes
| OD | ID | Lengths, ft. | Specifications Met | Per Ft. | |
White | |||||
|---|---|---|---|---|---|
1/16" Wall Thick. | |||||
| 1/4" | 1/8" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 5/8" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/8" Wall Thick. | |||||
| 1/2" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 3/4" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 7/8" | 5/8" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1 1/4" | 1" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1 1/2" | 1 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 3/4" | 1 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2" | 1 3/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2 1/4" | 2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
3/16" Wall Thick. | |||||
| 5/8" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/4" Wall Thick. | |||||
| 3/4" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1 1/4" | 3/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 1/2" | 1" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 3/4" | 1 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2" | 1 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2 1/2" | 2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
Black | |||||
1/16" Wall Thick. | |||||
| 1/4" | 1/8" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 5/8" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/8" Wall Thick. | |||||
| 1/2" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 3/4" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 7/8" | 5/8" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1 1/4" | 1" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1 1/2" | 1 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 3/4" | 1 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2" | 1 3/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2 1/4" | 2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
3/16" Wall Thick. | |||||
| 5/8" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
1/4" Wall Thick. | |||||
| 3/4" | 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 0000 | |
| 1" | 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 1/4" | 3/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 1/2" | 1" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 1 3/4" | 1 1/4" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2" | 1 1/2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
| 2 1/2" | 2" | ASTM D6778, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51 | 00000000 | 00000 | |
Slippery Wear-Resistant Easy-to-Machine
Delrin® Acetal AF Resin Rods and Discs
- Color: Brown
- Temperature Range: -40° to 185° F
- Tensile Strength: 7,690-8,100 psi (Good)
- Impact Strength: 0.7-1 ft.-lbs./in. (Poor)
- Hardness: Rockwell R115-R118 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6100, ASTM D6778, UL 94 HB
While just as dimensionally stable and machinable as standard Delrin® acetal resin rods and discs, these have a PTFE filler to make them more slippery and wear resistant. Fabricate them into pump components, gears, and bearings. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
Rods
| Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | |
| 1/4" | 0.000" to 0.002" | 0000000 | 00000 | |
| 3/8" | 0.000" to 0.002" | 0000000 | 0000 | |
| 1/2" | 0.000" to 0.002" | 0000000 | 00000 | |
| 5/8" | 0.000" to 0.002" | 0000000 | 00000 | |
| 3/4" | 0.000" to 0.002" | 0000000 | 00000 | |
| 1" | 0.000" to 0.002" | 0000000 | 00000 | |
| 1 1/8" | 0.000" to 0.005" | 0000000 | 00000 | |
| 1 1/4" | 0.000" to 0.005" | 0000000 | 00000 | |
| 1 1/2" | 0.000" to 0.005" | 0000000 | 00000 | |
| 1 3/4" | 0.000" to 0.008" | 0000000 | 00000 | |
| 2" | 0.000" to 0.008" | 0000000 | 000000 | |
| 2 1/4" | 0.000" to 0.250" | 0000000 | 000000 | |
| 2 1/2" | 0.000" to 0.250" | 0000000 | 000000 | |
| 3" | 0.000" to 0.250" | 0000000 | 000000 | |
| 3 1/2" | 0.000" to 0.250" | 0000000 | 000000 | |
| 4" | 0.000" to 0.250" | 0000000 | 000000 | |
| 5" | 0.000" to 0.250" | 0000000 | 000000 |
Slippery Wear-Resistant Easy-to-Machine
Delrin® Acetal AF Resin Sheets and Strips
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. These sheets and strips resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Fabricate them into pump components, gears, and bearings. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
Sheets
- Color: Brown
- Temperature Range: -40° to 185° F
- Tensile Strength: 7,690-8,100 psi (Good)
- Impact Strength: 0.7-1 ft.-lbs./in. (Poor)
- Hardness: Rockwell R115-R118 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6778, UL 94 HB
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/8" | -0.01" to 0.01" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 00000 |
| 3/8" | 0" to 0.025" | 00000000 | 00000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
12" × 12" | |||
| 1/8" | -0.01" to 0.01" | 00000000 | 00000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 000000 |
12" × 24" | |||
| 1/8" | -0.01" to 0.01" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 000000 |
| 5/8" | 0" to 0.025" | 00000000 | 000000 |
| 3/4" | 0" to 0.025" | 00000000 | 000000 |
| 1" | 0" to 0.025" | 00000000 | 00000000 |
12" × 48" | |||
| 1/8" | -0.01" to 0.01" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000000 |
| 5/8" | 0" to 0.025" | 00000000 | 00000000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000000 |
| 1" | 0" to 0.025" | 00000000 | 00000000 |
24" × 24" | |||
| 1/8" | -0.01" to 0.01" | 00000000 | 000000 |
| 1/4" | 0" to 0.025" | 00000000 | 000000 |
| 3/8" | 0" to 0.025" | 00000000 | 000000 |
| 1/2" | 0" to 0.025" | 00000000 | 00000000 |
| 5/8" | 0" to 0.025" | 00000000 | 00000000 |
| 3/4" | 0" to 0.025" | 00000000 | 00000000 |
| 1" | 0" to 0.025" | 00000000 | 00000000 |
Slippery Wear-Resistant Easy-to-Machine Delrin® Acetal AF Resin Tubes
- Color: Brown
- Temperature Range: -40° to 185° F
- Tensile Strength: 7,690-8,100 psi (Good)
- Impact Strength: 0.7-1 ft.-lbs./in. (Poor)
- Hardness: Rockwell R115-R118 (Hard)
- For Use Outdoors: No
- Specifications Met: See table
PTFE is added to these Delrin® acetal resin tubes to make the surface even more slippery and wear resistant. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Fabricate them into pump components, gears, and bearings. The OD is oversized and the ID is undersized for finishing to the sizes listed. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
Oversized Tubes
| OD | ID | Specifications Met | Lengths, ft. | Per Ft. | |
1/16" Wall Thick. | |||||
|---|---|---|---|---|---|
| 0.25" | 1/8" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 0.625" | 1/2" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
1/8" Wall Thick. | |||||
| 0.5" | 1/4" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 0.75" | 1/2" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 1.25" | 1" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
3/16" Wall Thick. | |||||
| 0.625" | 1/4" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
1/4" Wall Thick. | |||||
| 0.75" | 1/4" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 1" | 1/2" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 1.25" | 3/4" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 1.5" | 1" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |
| 2" | 1 1/2" | ASTM D6778, UL 94 HB | 0000000 | 00000 | |