Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

This wire meets stringent military specifications for material quality.

Maintain a supply of Mil. Spec. wire in multiple colors.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Connect batteries in vehicles and generators.

Keep spools of vehicle wire in multiple colors on hand.

The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.

This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering.

Use this general purpose cable to supply power to equipment.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.

Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.

Wire multiple components in your security system using a single cable.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Send data between computers, printers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.

This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Connect equipment and devices to a power supply.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.

All cords have a country-specific plug to power equipment from international outlets.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Transfer power between your door frame and door to power electric locks or exit devices.