About Rod Ends
![](https://www.mcmaster.com/prerenderstable/mvPRE/contents/gfx/small/60645kc3s.png?ver=1314261151)
More
About Ball and Roller Bearings
More
Angular-Contact Thrust Ball Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/882/8828t112p1-d03c-digitall@halfx_637054255956491850.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/882/8828t312p1-d03c-digitall@halfx_637054253895841439.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/882/8828t212p1-d03c-digitall@halfx_637054255156306013.png?ver=imagenotfound)
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Open | ||||||||||||||
7001 | 12 | 28 | 8 | Steel | 1,200 | 590 | 31,000 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 0000000 |
7005 | 25 | 47 | 12 | Steel | 2,750 | 1,800 | 32,500 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
7007 | 35 | 62 | 14 | Steel | 4,500 | 3,300 | 24,200 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
7008 | 40 | 68 | 15 | Steel | 4,800 | 3,800 | 21,700 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
7009 | 45 | 75 | 16 | Steel | 5,700 | 4,600 | 19,500 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
7010 | 50 | 80 | 16 | Steel | 6,050 | 5,200 | 18,000 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
7200 | 10 | 30 | 9 | Steel | 1,550 | 750 | 30,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7201 | 12 | 32 | 10 | Steel | 1,700 | 850 | 26,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7202 | 15 | 35 | 11 | Steel | 1,850 | 980 | 24,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7203 | 17 | 40 | 12 | Steel | 2,300 | 1,200 | 20,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7204 | 20 | 47 | 14 | Steel | 2,950 | 1,700 | 18,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7205 | 25 | 52 | 15 | Steel | 3,300 | 2,050 | 15,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7206 | 30 | 62 | 16 | Steel | 5,050 | 3,200 | 13,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7207 | 35 | 72 | 17 | Steel | 6,500 | 4,250 | 11,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7208 | 40 | 80 | 18 | Steel | 8,450 | 5,800 | 11,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7209 | 45 | 85 | 19 | Steel | 8,000 | 5,800 | 9,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7210 | 50 | 90 | 20 | Steel | 8,450 | 6,400 | 8,500 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7301 | 12 | 37 | 12 | Steel | 2,350 | 1,100 | 24,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7302 | 15 | 42 | 13 | Steel | 2,900 | 1,500 | 20,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7303 | 17 | 47 | 14 | Steel | 3,550 | 1,850 | 19,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
7304 | 20 | 52 | 15 | Steel | 3,900 | 2,100 | 16,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7305 | 25 | 62 | 17 | Steel | 5,400 | 3,100 | 14,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7306 | 30 | 72 | 19 | Steel | 7,300 | 4,300 | 12,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7307 | 35 | 80 | 21 | Steel | 8,750 | 5,500 | 10,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7308 | 40 | 90 | 23 | Steel | 10,300 | 6,850 | 9,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7309 | 45 | 100 | 25 | Steel | 12,500 | 8,400 | 8,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
7310 | 50 | 110 | 27 | Steel | 15,400 | 10,600 | 7,500 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
Sealed | ||||||||||||||
7200-2RS | 10 | 30 | 9 | Steel | 1,150 | 580 | 15,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 00000 |
7201-2RS | 12 | 32 | 10 | Steel | 1,650 | 790 | 14,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7202-2RS | 15 | 35 | 11 | Steel | 1,850 | 1,000 | 24,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7203-2RS | 17 | 40 | 12 | Steel | 2,350 | 1,250 | 11,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7204-2RS | 20 | 47 | 14 | Steel | 3,100 | 1,750 | 9,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7205-2RS | 25 | 52 | 15 | Steel | 3,400 | 2,000 | 8,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7206-2RS | 30 | 62 | 16 | Steel | 4,850 | 3,150 | 6,300 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7207-2RS | 35 | 72 | 17 | Steel | 6,250 | 4,250 | 5,600 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7208-2RS | 40 | 80 | 18 | Steel | 7,600 | 5,250 | 5,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7302-2RS | 15 | 42 | 13 | Steel | 3,150 | 1,600 | 11,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7303-2RS | 17 | 47 | 14 | Steel | 3,950 | 2,000 | 13,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7304-2RS | 20 | 52 | 15 | Steel | 4,550 | 2,450 | 8,500 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7305-2RS | 25 | 62 | 17 | Steel | 6,250 | 3,600 | 7,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7306-2RS | 30 | 72 | 19 | Steel | 7,650 | 4,950 | 6,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
7308-2RS | 40 | 90 | 23 | Steel | 11,900 | 7,750 | 4,500 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
Double Row | ||||||||||||||
Open | ||||||||||||||
3200 | 10 | 30 | 14 | Steel | 1,700 | 960 | 22,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3201 | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 20,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3202 | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 17,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3203 | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 15,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3204 | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 00000 |
3205 | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 00000 |
3206 | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3207 | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3208 | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3210 | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3303 | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3304 | 20 | 52 | 22.2 | Steel | 5,300 | 3,250 | 13,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3305 | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
Shielded | ||||||||||||||
3200-2Z | 10 | 30 | 14 | Steel | 1,700 | 960 | 24,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
3201-2Z | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 22,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
3202-2Z | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 18,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
3203-2Z | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 16,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
3204-2Z | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3205-2Z | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3206-2Z | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Lubricated | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
3207-2Z | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3208-2Z | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3210-2Z | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3303-2Z | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
3304-2Z | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 13,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
3305-2Z | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
Sealed | ||||||||||||||
3200-2RS | 10 | 30 | 14 | Steel | 1,700 | 960 | 17,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
3201-2RS | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 15,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
3202-2RS | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 14,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
3203-2RS | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 12,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 00000 |
3204-2RS | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 10,000 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3205-2RS | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 8,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3206-2RS | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 7,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3207-2RS | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 6,300 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3208-2RS | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 5,600 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3210-2RS | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 4,800 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3303-2RS | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 11,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
3304-2RS | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 9,000 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
3305-2RS | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 7,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
High-Speed Angular-Contact Thrust Ball Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/448/4487n26-@halfx_1696516577.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/448/4487n11-@halfx_1696516537.png?ver=imagenotfound)
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Open | |||||||||||||
7001 | 12 | 28 | 8 | Steel | 1,000 | 420 | 67,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 0000000 |
7002 | 15 | 32 | 9 | Steel | 1,150 | 530 | 56,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7003 | 17 | 35 | 10 | Steel | 1,500 | 710 | 50,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7004 | 20 | 42 | 12 | Steel | 1,950 | 960 | 43,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7005 | 25 | 47 | 12 | Steel | 2,150 | 1,150 | 36,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7006 | 30 | 55 | 13 | Steel | 3,200 | 1,750 | 32,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7007 | 35 | 62 | 14 | Steel | 3,500 | 2,100 | 24,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7008 | 40 | 68 | 15 | Steel | 3,750 | 2,450 | 20,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7009 | 45 | 75 | 16 | Steel | 6,400 | 5,000 | 19,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7010 | 50 | 80 | 16 | Steel | 6,650 | 5,350 | 17,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
7200 | 10 | 30 | 9 | Steel | 1,250 | 580 | 57,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7201 | 12 | 32 | 10 | Steel | 1,850 | 860 | 52,300 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7202 | 15 | 35 | 11 | Steel | 2,000 | 1,000 | 46,000 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7203 | 17 | 40 | 12 | Steel | 2,550 | 1,300 | 40,400 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7204 | 20 | 47 | 14 | Steel | 3,400 | 1,800 | 34,400 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7205 | 25 | 52 | 15 | Steel | 3,900 | 2,250 | 29,900 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7206 | 30 | 62 | 16 | Steel | 5,400 | 3,300 | 25,000 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7207 | 35 | 72 | 17 | Steel | 7,150 | 4,450 | 21,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7208 | 40 | 80 | 18 | Steel | 8,500 | 5,650 | 19,200 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7209 | 45 | 85 | 19 | Steel | 9,650 | 6,450 | 17,700 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
7210 | 50 | 90 | 20 | Steel | 10,100 | 7,050 | 16,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
Sealed | |||||||||||||
7006 | 30 | 55 | 13 | Steel | 3,550 | 2,300 | 27,100 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7007 | 35 | 62 | 14 | Steel | 4,500 | 3,050 | 23,800 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7008 | 40 | 68 | 15 | Steel | 4,850 | 3,550 | 21,300 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7009 | 45 | 75 | 16 | Steel | 5,750 | 4,300 | 19,200 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7010 | 50 | 80 | 16 | Steel | 6,100 | 4,900 | 17,700 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7011 | 55 | 90 | 18 | Steel | 8,050 | 6,400 | 15,900 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
7012 | 60 | 95 | 18 | Steel | 8,300 | 6,850 | 14,900 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 00000000 |
7013 | 65 | 100 | 18 | Steel | 8,750 | 7,750 | 14,000 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 00000000 |
Tapered-Roller Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/570/5709k88p1-d03c-digital@halfx_637051283020567059.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/570/5709k81l1-d03c-digital-masterk1570133144-p9@halfx_637057119580331384.png?ver=imagenotfound)
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
Zinc-plated steel bearings provide better corrosion resistance than steel bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
3/8" | 1 17/64" | 5/16" | A2037/A2126 | 630 | 2,050 | 430 | 2,450 | 7,200 | Required | -60° to 200° | 00000000 | 0000000 |
1/2" | 1 3/8" | 0.344" | A4050/A4138 | 700 | 2,550 | 550 | 3,400 | 6,300 | Required | -60° to 200° | 00000000 | 00000 |
5/8" | 1 11/16" | 3/8" | 11590/11520 | 1,000 | 3,900 | 1,200 | 8,000 | 5,000 | Required | -60° to 200° | 0000000 | 00000 |
11/16" | 1 37/64" | 0.42" | LM11749/LM11710 | 1,300 | 5,250 | 650 | 4,350 | 5,500 | Required | -60° to 200° | 0000000 | 00000 |
3/4" | 1 25/32" | 0.475" | LM11949/LM11910 | 1,750 | 7,200 | 910 | 6,300 | 4,900 | Required | -60° to 200° | 0000000 | 00000 |
3/4" | 1 15/16" | 9/16" | 09067/09195 | 2,300 | 9,100 | 1,050 | 7,050 | 4,900 | Required | -60° to 200° | 00000000 | 00000 |
55/64" | 1 25/32" | 0.475" | LM12749/LM12710 | 1,750 | 7,900 | 920 | 7,050 | 4,500 | Required | -60° to 200° | 0000000 | 00000 |
7/8" | 2 3/64" | 1/2" | 07087/07204 | 1,700 | 6,650 | 1,150 | 7,750 | 4,100 | Required | -60° to 200° | 00000000 | 00000 |
63/64" | 1 31/32" | 3/8" | 07097/07196 | 1,550 | 6,650 | 1,050 | 7,750 | 4,100 | Required | -60° to 200° | 0000000 | 00000 |
1" | 1 31/32" | 3/8" | 07100/07196 | 1,550 | 6,650 | 1,050 | 7,750 | 4,100 | Required | -60° to 200° | 00000000 | 00000 |
1" | 1 63/64" | 0.42" | L44643/L44610 | 1,600 | 7,400 | 1,000 | 8,050 | 3,900 | Required | -60° to 200° | 0000000 | 00000 |
1" | 2 7/16" | 9/16" | 15100/15245 | 2,700 | 12,100 | 1,600 | 12,400 | 3,300 | Required | -60° to 200° | 0000000 | 00000 |
1 1/16" | 1 63/64" | 0.42" | L44649/L44610 | 1,600 | 7,400 | 1,000 | 8,050 | 3,900 | Required | -60° to 200° | 0000000 | 00000 |
1 1/8" | 2 29/64" | 9/16" | 15113/15245 | 2,700 | 12,100 | 1,600 | 12,400 | 3,300 | Required | -60° to 200° | 00000000 | 00000 |
1 3/16" | 2 7/16" | 5/8" | 15118/15244 | 2,700 | 12,100 | 1,600 | 12,400 | 3,300 | Required | -60° to 200° | 0000000 | 000000 |
1 1/4" | 2 21/64" | 0.465" | LM67048/LM67010 | 2,100 | 10,000 | 1,500 | 12,000 | 3,400 | Required | -60° to 200° | 0000000 | 00000 |
1 1/4" | 2 23/32" | 5/8" | 14125A/14276 | 2,950 | 13,900 | 1,900 | 15,400 | 3,000 | Required | -60° to 200° | 00000000 | 00000 |
1 5/16" | 2 11/16" | 11/16" | M88048/M88010 | 3,450 | 17,400 | 3,250 | 27,700 | 3,000 | Required | -60° to 200° | 0000000 | 00000 |
1 3/8" | 2 23/32" | 5/8" | 14137A/14274 | 3,150 | 13,900 | 2,050 | 15,400 | 3,000 | Required | -60° to 200° | 00000000 | 00000 |
1 7/16" | 3" | 15/16" | 31597/31521 | 5,500 | 24,100 | 3,800 | 28,200 | 2,800 | Required | -60° to 200° | 00000000 | 000000 |
1 1/2" | 3" | 3/4" | 2788/2720 | 4,650 | 23,000 | 2,400 | 20,300 | 2,800 | Required | -60° to 200° | 0000000 | 00000 |
1 3/4" | 3 17/64" | 3/4" | 25580/25520 | 4,850 | 24,900 | 2,800 | 24,200 | 2,400 | Required | -60° to 200° | 0000000 | 00000 |
2" | 3 1/4" | 0.65" | LM104949/LM104911 | 4,350 | 23,400 | 2,250 | 20,800 | 2,300 | Required | -60° to 200° | 0000000 | 00000 |
2" | 3 1/2" | 0.65" | 368A/362A | 4,600 | 21,500 | 2,500 | 20,100 | 2,300 | Required | -60° to 200° | 0000000 | 00000 |
2" | 4 1/8" | 15/16" | 45284/45220 | 8,250 | 42,600 | 4,700 | 41,300 | 1,900 | Required | -60° to 200° | 0000000 | 000000 |
2 1/4" | 3 13/16" | 5/8" | 387A/382A | 4,900 | 24,100 | 2,950 | 24,900 | 2,000 | Required | -60° to 200° | 0000000 | 00000 |
2 1/2" | 4 1/4" | 3/4" | 29585/29520 | 7,600 | 36,300 | 5,950 | 48,400 | 1,700 | Required | -60° to 200° | 00000000 | 000000 |
2 3/4" | 4 7/16" | 3/4" | 29675/29620 | 5,950 | 37,200 | 4,950 | 52,800 | 1,600 | Required | -60° to 200° | 00000000 | 000000 |
3" | 5" | 7/8" | 42687/42620 | 8,650 | 49,800 | 6,200 | 60,800 | 1,500 | Required | -60° to 200° | 00000000 | 000000 |
3 1/4" | 5 1/4" | 1.031" | 47686/47620 | 9,750 | 58,750 | 6,750 | 69,250 | 1,400 | Required | -60° to 200° | 0000000 | 000000 |
4" | 6 3/16" | 1.031" | 52400/52618 | 13,000 | 77,000 | 10,600 | 107,000 | 1,100 | Required | -60° to 200° | 00000000 | 000000 |
15mm | 42mm | 11mm | 30302 | 1,400 | 4,950 | 680 | 4,100 | 5,700 | Required | -60° to 200° | 0000000 | 00000 |
15mm | 42mm | 11mm | 30302 | 5,350 | 4,850 | 2,500 | Not Rated | 9,000 | Required | -50° to 300° | 0000000 | 00000 |
17mm | 40mm | 11mm | 30203 | 1,150 | 4,450 | 680 | 4,450 | 5,400 | Required | -60° to 200° | 0000000 | 00000 |
17mm | 40mm | 11mm | 30203 | 4,750 | 4,750 | 2,850 | Not Rated | 9,000 | Required | -50° to 300° | 0000000 | 00000 |
20mm | 47mm | 12mm | 30204 | 1,750 | 7,400 | 1,050 | 7,450 | 4,600 | Required | -60° to 200° | 0000000 | 00000 |
20mm | 47mm | 12mm | 30204 | 6,300 | 6,850 | 3,750 | Not Rated | 8,000 | Required | -50° to 300° | 0000000 | 00000 |
20mm | 52mm | 13mm | 30304 | 2,050 | 7,750 | 1,050 | 6,750 | 4,500 | Required | -60° to 200° | 0000000 | 00000 |
20mm | 52mm | 13mm | 30304 | 10,000 | 10,400 | 5,100 | Not Rated | 7,500 | Required | -50° to 300° | 0000000 | 00000 |
25mm | 52mm | 13mm | 30205 | 1,800 | 8,600 | 1,150 | 9,400 | 4,100 | Required | -60° to 200° | 0000000 | 00000 |
25mm | 52mm | 13mm | 30205 | 6,600 | 5,050 | 4,050 | Not Rated | 7,500 | Required | -50° to 300° | 0000000 | 00000 |
30mm | 55mm | 13mm | 32006 | 2,100 | 10,200 | 1,550 | 12,800 | 3,500 | Required | -60° to 200° | 0000000 | 00000 |
30mm | 55mm | 13mm | 32006 | 8,500 | 10,950 | 6,250 | Not Rated | 6,700 | Required | -50° to 300° | 0000000 | 00000 |
30mm | 62mm | 14mm | 30206 | 2,350 | 9,850 | 1,500 | 12,700 | 3,400 | Required | -60° to 200° | 0000000 | 00000 |
30mm | 62mm | 14mm | 30206 | 10,200 | 11,350 | 6,450 | Not Rated | 6,300 | Required | -50° to 300° | 0000000 | 00000 |
35mm | 62mm | 14mm | 32007 | 2,550 | 12,900 | 2,000 | 17,100 | 3,000 | Required | -60° to 200° | 0000000 | 00000 |
35mm | 62mm | 14mm | 32007 | 9,400 | 12,550 | 7,400 | Not Rated | 6,000 | Required | -50° to 300° | 0000000 | 00000 |
35mm | 72mm | 15mm | 30207 | 3,250 | 14,300 | 2,100 | 15,600 | 2,900 | Required | -60° to 200° | 0000000 | 00000 |
35mm | 72mm | 15mm | 30207 | 9,400 | 12,550 | 5,950 | Not Rated | 5,300 | Required | -50° to 300° | 0000000 | 00000 |
40mm | 68mm | 14.5mm | 32008 | 3,000 | 16,100 | 1,900 | 17,700 | 2,700 | Required | -60° to 200° | 0000000 | 00000 |
40mm | 68mm | 14.5mm | 32008 | 10,550 | 15,100 | 6,650 | Not Rated | 5,300 | Required | -50° to 300° | 0000000 | 00000 |
50mm | 80mm | 19mm | 33010 | 4,650 | 25,200 | 2,500 | 23,300 | 2,200 | Required | -60° to 200° | 0000000 | 000000 |
60mm | 95mm | 17.5mm | 32012 | 5,600 | 29,500 | 4,100 | 37,000 | 1,800 | Required | -60° to 200° | 0000000 | 00000 |
70mm | 110mm | 19mm | 32014 | 6,500 | 36,600 | 4,850 | 46,500 | 1,500 | Required | -60° to 200° | 0000000 | 000000 |
80mm | 125mm | 22mm | 32016 | 9,650 | 53,500 | 7,000 | 55,500 | 1,400 | Required | -60° to 200° | 0000000 | 000000 |
Zinc-Plated Steel Ring | ||||||||||||
Open | ||||||||||||
3/4" | 1 25/32" | 0.475" | LM11949/LM11910 | 1,750 | 7,200 | 910 | 6,300 | 4,900 | Required | -60° to 200° | 0000000 | 00000 |
1" | 1 63/64" | 0.42" | L44643/L44610 | 1,600 | 7,400 | 1,000 | 8,050 | 3,900 | Required | -60° to 200° | 0000000 | 00000 |
1 1/16" | 1 63/64" | 0.42" | L44649/L44610 | 1,600 | 7,400 | 1,000 | 8,050 | 3,900 | Required | -60° to 200° | 0000000 | 00000 |
1 1/4" | 2 21/64" | 0.465" | LM67048/LM67010 | 2,100 | 10,000 | 1,500 | 12,000 | 3,400 | Required | -60° to 200° | 0000000 | 00000 |
High-Load Tapered-Roller Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/445/4456n12-@halfx_1694794654.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/445/4456n12-@halfx_1694794645.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/tap/tapered-roller-bearings-width-@halfx_1694794639.png?ver=imagenotfound)
Double rows of tapered bearings support large shafts with heavy loads. They also handle thrust loads in either direction as well as radial loads. All come assembled and ready to use.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade No. | Taper Direction | Dynamic | Static | Dynamic | Static | Thrust Clearance | For Thrust Load Type | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Steel Ring | ||||||||||||||||
Open | ||||||||||||||||
1 1/4" | 2 5/16" | 31/32" | 08125/08231D | Out | 12,400 | 7,850 | 5,750 | 10,900 | 0.008" | Two Direction | 12,000 | Required | -65° to 250° | One Spacer | 0000000 | 0000000 |
2 1/4" | 4 1/4" | 2 1/8" | 462/452D | Out | 62,900 | 37,200 | 20,700 | 36,400 | 0.012" | Two Direction | 6,700 | Required | -65° to 250° | One Spacer | 0000000 | 000000 |
4" | 7 1/2" | 4" | 861/854D | Out | 179,000 | 142,000 | 59,000 | 138,000 | 0.012" | Two Direction | 3,800 | Required | -65° to 250° | One Spacer | 0000000 | 00000000 |
Thrust-Rated Swivel Joints
![](/prerenderstable/mvPRE/contents/gfx/imagecache/245/2459k12burnished-nickelpositive_top_negative_front_flop15_1602507181_797@halfx_637380860625103462.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/245/2459k13l1-d03c-digital-master1549291338-p9@halfx_636598984690050000.png?ver=imagenotfound)
A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads. Also known as spherical bearings, you can press them into tight spots where a rod end shank won’t fit or mount them in a drilled hole or a rod end blank.
Lubricate these joints with any type of bearing grease when you install them. Apply the grease to the exposed surface of the ball, then rotate the ball to work the grease into the races. You’ll need to reapply grease regularly.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Static Thrust Load Cap., lbs. | Material | Each | |
1/2" | 7/8" | 5/16" | 3/16" | 7° | 4,000 | 5,200 | Bearing Steel | 0000000 | 0000000 |
5/8" | 1 1/16" | 3/8" | 1/4" | 6° | 6,900 | 8,700 | Bearing Steel | 0000000 | 000000 |
3/4" | 1 1/4" | 7/16" | 5/16" | 6° | 10,500 | 12,600 | Bearing Steel | 0000000 | 000000 |
7/8" | 1 7/16" | 1/2" | 3/8" | 5° | 14,900 | 17,600 | Bearing Steel | 0000000 | 000000 |
1" | 1 5/8" | 5/8" | 7/16" | 6° | 19,600 | 22,200 | Bearing Steel | 0000000 | 000000 |
1 1/4" | 2" | 3/4" | 9/16" | 6° | 32,000 | 35,400 | Bearing Steel | 0000000 | 000000 |
1 1/2" | 2 7/16" | 15/16" | 5/8" | 5° | 44,500 | 51,900 | Bearing Steel | 0000000 | 000000 |
1 3/4" | 2 13/16" | 1 1/16" | 13/16" | 6° | 61,600 | 69,300 | Bearing Steel | 0000000 | 000000 |
2" | 3 3/16" | 1 1/4" | 15/16" | 6° | 82,500 | 91,700 | Bearing Steel | 0000000 | 000000 |