Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
About Turnbuckles and End Fittings
More
Threaded-Rod-Mount Multiline Hangers
Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal. Hangers are zinc-plated steel for good corrosion resistance. To install, pinch the mounting brackets together, fit onto threaded rod, and release.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size  | For Thread Size | Color | Cap., lbs. | Lg. | Wd. | Ht. | O'all Ht. | Thick. | Each | |
Zinc-Plated Steel | ||||||||||||
| 1 1/4" | 33 | __ | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 1 45/64" | 1 13/32" | 3 1/8" | 3 13/16" | 3/64" | 0000000 | 00000 |
| 1 3/8" | 36 | 1 | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 1 13/16" | 1 13/32" | 3 1/4" | 3 11/16" | 3/64" | 0000000 | 0000 |
| 2 3/8" | 61 | 2 | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 2 13/16" | 1 13/32" | 4 3/16" | 5" | 3/64" | 0000000 | 0000 |
| 3 3/8" | 86 | __ | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 4 1/64" | 1 13/32" | 6 1/4" | 7" | 3/64" | 0000000 | 00000 |
Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Thread | ||||||
|---|---|---|---|---|---|---|---|
| Dia. | Construction | Overall Lg. | Size | Lg. | Sleeve Dia. | Each | |
316 Stainless Steel | |||||||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/8" | 5/16"-24 | 2 1/4" | 23/32" | 0000000 | 000000 |
Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Fittings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Thread | Dies | ||||||||||
| Dia. | Construction | Overall Lg. | Size | Lg. | Shank Dia. | Capacity, lbs. | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
18-8 Stainless Steel | ||||||||||||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 1/16" | 5/16"-24 | 1 1/2" | 3/8" | 800 | MS21259 | 0000000 | 000000 | 2 | 0000000 | 000000000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
316 stainless steel has good corrosion resistance.
Forged bodies and components are stronger than cast and wire drawn bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Features | Each | |
Forged Steel Body with Galvanized Steel Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1,600 | 9" | 3 3/4" | 13 3/4" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
| 1,600 | 8 1/2" | 4 1/8" | 12 5/8" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||
|---|---|---|---|---|---|---|---|---|
| 200 | 8 1/2" | 4 1/8" | 12 5/8" | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
| 1,600 | 8 5/8" | 3 3/4" | 12 3/8" | 5/16" | Cotter Ring | 5/16" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 200 | 8 1/2" | 4 1/8" | 12 5/8" | 1/2" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
| 1,600 | 8 1/2" | 4" | 12 1/2" | 5/16" | Cotter Ring | 5/16" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
| 70% of the Rope's Capacity | 7 3/4" | 3" | 10 3/4" | 2 13/16" | 13/16" | 360° Swivel | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.318" | Yes | 5/16"-24 | 0000000 | 000000 |
Hook-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||
| 200 | 8 3/8" | 4 1/4" | 12 5/8" | 1/2" | 5/16" | Cotter Ring | 5/16" | 5/16"-24 | Jam Nuts | 0000000 | 000000 |
Closed Turnbuckle Bodies—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, they have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Max. Adjustment | Overall Lg. | Capacity, lbs. | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 5/16"-24 | 3 3/4" | 5 1/8" | 1,600 | 0000000 | 000000 |
Eye End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clevis End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
Forged fittings are stronger than cast and wire drawn fittings.
Clevis Pin | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Dia. | Closure Type | Clevis Inside Wd. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||||
Forged 18-8 Stainless Steel | ||||||||
| 5/16"-24 | 2 9/16" | 5/16" | Cotter Ring | 5/16" | 4 1/2" | 1,600 | 00000000 | 000000 |
Right-Hand, Left-Hand Thread Direction | ||||||||
18-8 Stainless Steel | ||||||||
| 10-32, 1/4"-28, 5/16"-24, 3/8"-24, 1/2"-20, 5/8"-18 | __ | __ | __ | __ | __ | __ | 00000000 | 00 |
Left-Hand Thread Direction | ||||||||
Forged 18-8 Stainless Steel | ||||||||
| 5/16"-24 | 2 9/16" | 5/16" | Cotter Ring | 5/16" | 4 1/2" | 1,600 | 00000000 | 00000 |
Hook End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.