Stud-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Never exceed load capacity. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Thread | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | O'all Lg. | Size | Lg. | Sleeve Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Zinc-Plated Steel | |||||||||
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel is mildly corrosion resistant.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for vertical lifting only.
Clevis Pin | For Wire Rope | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Dia. | Construction | Wire Rope Fitting Type | Specifications Met | Each | |
Zinc-Plated Steel Body with Steel Fittings | |||||||||||||
| 3,020 | 13 1/4" | 5 5/16" | 18 9/16" | 1/2" | Cotter Pin | 7/16" | 3/4"-16 | 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 0000000 |