About Hex Head Screws and Bolts
More
About Turnbuckles and End Fittings
More
Machine Screw-Style Hangers
Also known as spade bolts, you can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt). Zinc plating provides corrosion resistance in wet environments. Material meets ASTM A307 or F2282 specifications for quality.
For technical drawings and 3-D models, click on a part number.
Stud-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Never exceed load capacity. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Thread | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | O'all Lg. | Size | Lg. | Sleeve Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 000000 |
Zinc-Plated Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | 18-8 Stainless Steel | 000000000 | 000000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | 18-8 Stainless Steel | 000000000 | 000000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | Black-Oxide Steel | 000000000 | 000000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | 6" | 2 1/4" | 8 1/4" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||
|---|---|---|---|---|---|---|---|---|
| 80 | 5 1/2" | 2 1/2" | 8" | 1/4" | 10-32 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
| 400 | 5 7/8" | 2 3/8" | 8 1/4" | 3/16" | Cotter Ring | 3/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 80 | 5 5/8" | 2 1/2" | 8 1/8" | 1/4" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
| 400 | 5 7/8" | 2 3/8" | 8 1/4" | 3/16" | Cotter Ring | 3/16" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
Hook-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||
| 80 | 5 3/4" | 2 1/4" | 8" | 1/4" | 3/16" | Cotter Ring | 3/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | For Wire Rope | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Dia. | Construction | Wire Rope Fitting Type | Specifications Met | Each | |
Steel Body with Steel Fittings | |||||||||||||
| 90 | 6 5/16" | 2 1/2" | 8 13/16" | 3/16" | Cotter Pin | 3/16" | 10-32 | 1/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
Closed Turnbuckle Bodies—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, they have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Max. Adjustment | Overall Lg. | Capacity, lbs. | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 10-32 | 2 1/2" | 3 1/2" | 400 | 0000000 | 000000 |
Eye End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clevis End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
Forged fittings are stronger than cast and wire drawn fittings.
Clevis Pin | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Dia. | Closure Type | Clevis Inside Wd. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||||
Forged 18-8 Stainless Steel | ||||||||
| 10-32 | 1 3/16" | 3/16" | Cotter Ring | 3/16" | 3 1/16" | 400 | 00000000 | 000000 |
Right-Hand, Left-Hand Thread Direction | ||||||||
18-8 Stainless Steel | ||||||||
| 10-32, 1/4"-28, 5/16"-24, 3/8"-24, 1/2"-20, 5/8"-18 | __ | __ | __ | __ | __ | __ | 00000000 | 00 |
Left-Hand Thread Direction | ||||||||
Forged 18-8 Stainless Steel | ||||||||
| 10-32 | 1 3/16" | 3/16" | Cotter Ring | 3/16" | 3 1/16" | 400 | 00000000 | 00000 |
Hook End Fittings for Turnbuckles—Not for Lifting
18-8 stainless steel fittings have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.