Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Routing Clamps
Brace pipe, tubing, and conduit directly against the mounting surface.
Brass clamps are excellent for use with copper because brass won't corrode copper like steel and stainless steel.
For technical drawings and 3-D models, click on a part number.
ID | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Mounting Points | Inch | Metric, mm | For Pipe Size  | Ctr.-to-Ctr. Lg. | Lg. | Wd. | Ht. | Thick. | Fasteners Included | Hole Dia. | For Use Outdoors | Pkg. Qty. | Pkg. | |
Brass | ||||||||||||||
| 1 | 3/16" | 5 | __ | 7/16" | 7/8" | 1/2" | 1/4" | 1/32" | No | 3/16" | No | 25 | 0000000 | 000000 |
| 1 | 1/4" | 6 | __ | 1/2" | 1" | 1/2" | 5/16" | 1/32" | No | 3/16" | No | 25 | 0000000 | 00000 |
| 1 | 5/16" | 8 | __ | 1/2" | 1" | 1/2" | 3/8" | 1/32" | No | 3/16" | No | 25 | 0000000 | 00000 |
| 1 | 3/8" | 10 | __ | 9/16" | 1 1/4" | 5/8" | 7/16" | 1/16" | No | 3/16" | No | 25 | 0000000 | 00000 |
| 1 | 9/16" | 14 | 1/4 | 5/8" | 1 3/8" | 5/8" | 5/8" | 1/16" | No | 3/16" | No | 25 | 0000000 | 00000 |
Wraparound Rope Cleats
Wind rope around these cleats for a secure, temporary hold.
Bolt-on cleats have exposed fasteners that attach directly to the deck or other surface.
Aluminum and brass cleats are often used in marine environments.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Routing Eyebolts for Wood—Not for Lifting
Also known as screw eyes, use the sharp point of these eyebolts to mount directly into wood. Brass and 300 series stainless steel eyebolts are more corrosion resistant than zinc-plated steel.
For technical drawings and 3-D models, click on a part number.
| Eyebolt Trade Size | Wire Dia. | Thread Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 214 1/2 | 5/64" | 3/16" | 3/8" | 5/8" | 1/8" | 50 | 0000000 | 000000 |
| 214 | 5/64" | 3/8" | 1/2" | 3/4" | 1/8" | 50 | 0000000 | 00000 |
| 212 1/2 | 7/64" | 5/16" | 3/8" | 3/4" | 3/16" | 50 | 0000000 | 00000 |
| 212 | 7/64" | 7/16" | 9/16" | 7/8" | 3/16" | 50 | 0000000 | 00000 |
| 210 | 9/64" | 9/16" | 11/16" | 1 1/8" | 3/16" | 25 | 0000000 | 00000 |
| 208 | 5/32" | 11/16" | 13/16" | 1 3/8" | 3/16" | 20 | 0000000 | 00000 |
| 206 | 3/16" | 3/4" | 1" | 1 5/8" | 1/4" | 10 | 0000000 | 0000 |
| 204 | 7/32" | 15/16" | 1 1/8" | 1 7/8" | 1/4" | 10 | 0000000 | 00000 |
| 114 | 5/64" | 3/8" | 1/2" | 7/8" | 1/4" | 50 | 0000000 | 00000 |
| 112 | 7/64" | 7/16" | 9/16" | 1 1/8" | 1/4" | 50 | 0000000 | 00000 |
| 110 | 9/64" | 9/16" | 11/16" | 1 1/4" | 5/16" | 25 | 0000000 | 00000 |
| 108 | 5/32" | 11/16" | 13/16" | 1 1/2" | 3/8" | 20 | 0000000 | 00000 |
| 106 | 3/16" | 3/4" | 1" | 1 3/4" | 7/16" | 10 | 0000000 | 00000 |
| 104 | 7/32" | 15/16" | 1 1/8" | 2" | 7/16" | 10 | 0000000 | 00000 |
| 14 | 5/64" | 3/8" | 1/2" | 1" | 5/16" | 50 | 0000000 | 00000 |
| 12 | 7/64" | 7/16" | 9/16" | 1 1/8" | 3/8" | 25 | 0000000 | 00000 |
| 10 | 9/64" | 9/16" | 11/16" | 1 3/8" | 3/8" | 25 | 0000000 | 00000 |
| 9 | 9/64" | 5/8" | 3/4" | 1 1/2" | 7/16" | 20 | 0000000 | 00000 |
| 8 | 5/32" | 11/16" | 13/16" | 1 5/8" | 7/16" | 20 | 0000000 | 00000 |
| 6 | 3/16" | 3/4" | 1" | 1 7/8" | 1/2" | 10 | 0000000 | 00000 |
| 4 | 7/32" | 15/16" | 1 1/8" | 2 1/8" | 9/16" | 5 | 0000000 | 0000 |
| 2 | 17/64" | 1 1/8" | 1 5/16" | 2 5/8" | 11/16" | 5 | 0000000 | 00000 |
| 0 | 5/16" | 1 1/4" | 1 9/16" | 2 7/8" | 13/16" | 1 | 0000000 | 0000 |
Plugs for Plug-Lock Wire Rope End Fittings—For Lifting
Use a new plug when installing a fitting on a different rope.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | ||||
|---|---|---|---|---|
| Dia. | Construction | Material | Each | |
| 1/16" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 3/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 1/8" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 5/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 3/16" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 7/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 1/4" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 9/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 3/8" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 1/2" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
Hook-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Hook | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Material | Capacity, lbs. | Each | |
Nickel-Plated Brass | |||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 11/32" | 2 31/32" | 17/32" | 1/4" | Steel | 25 | 0000000 | 00000 |
| 5/64"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 15/32" | 3 9/16" | 17/32" | 1/4" | Steel | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 19/32" | 4 7/32" | 17/32" | 1/4" | Steel | 110 | 0000000 | 00000 |
Eye-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Clevis-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Capacity, lbs. | Each | |
Nickel-Plated Brass | ||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 1 23/32" | 5/16" | 9/16" | 5/16" | 25 | 0000000 | 000000 |
| 1/16"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 2 7/32" | 1/4" | 15/32" | 1/4" | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 3 17/32" | 3/8" | 19/32" | 3/8" | 110 | 0000000 | 00000 |
Screw-In Hooks
Threads on one end make it easy to screw these hooks directly into a wall.
For technical drawings and 3-D models, click on a part number.
| Style | Wire Dia. | Projection | O'all Ht. | Thread Lg. | Cap., lbs. | Material | Appearance | Pkg. Qty. | Pkg. | |
Wall Mount | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| D | 0.07" | 1/2" | 1/4" | 1/8" | Not Rated | Brass | Polished | 100 | 000000 | 000000 |
| D | 0.08" | 5/8" | 1/4" | 1/8" | Not Rated | Brass | Polished | 50 | 000000 | 00000 |
| D | 0.09" | 3/4" | 3/8" | 1/8" | Not Rated | Brass | Polished | 50 | 000000 | 00000 |
| D | 0.11" | 7/8" | 3/8" | 1/4" | Not Rated | Brass | Polished | 50 | 000000 | 0000 |
| D | 0.12" | 1" | 1/2" | 1/4" | Not Rated | Brass | Polished | 25 | 0000000 | 00000 |
| D | 0.15" | 1 1/4" | 3/8" | 3/8" | Not Rated | Brass | Polished | 25 | 0000000 | 00000 |
| D | 0.15" | 1 1/2" | 3/8" | 3/8" | Not Rated | Brass | Polished | 10 | 0000000 | 0000 |
| D | 0.18" | 2" | 1/2" | 1/2" | Not Rated | Brass | Polished | 10 | 0000000 | 00000 |
Wall, Under Mount | ||||||||||
| F | 0.07" | 1/2" | 3/8" | 1/4" | Not Rated | Brass | Polished | 50 | 000000 | 0000 |
| F | 0.08" | 5/8" | 3/8" | 1/4" | Not Rated | Brass | Polished | 50 | 000000 | 00000 |
| F | 0.09" | 3/4" | 1/2" | 1/4" | Not Rated | Brass | Polished | 50 | 000000 | 00000 |
| F | 0.11" | 7/8" | 5/8" | 3/8" | Not Rated | Brass | Polished | 25 | 0000000 | 0000 |
| F | 0.12" | 1" | 3/4" | 3/8" | Not Rated | Brass | Polished | 25 | 0000000 | 00000 |
| F | 0.15" | 1 1/4" | 1" | 1/2" | Not Rated | Brass | Polished | 10 | 0000000 | 0000 |
| F | 0.15" | 1 1/2" | 1 1/8" | 1/2" | Not Rated | Brass | Polished | 10 | 0000000 | 0000 |
| F | 0.18" | 2" | 1 1/2" | 5/8" | Not Rated | Brass | Polished | 10 | 0000000 | 00000 |