We will reply to your message within an hour.
More
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
These sheets and bars are precision ground either on all six sides or just on the top and bottom.
The thickness is oversized to allow for finishing to exact requirements.
An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.
These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.
Choose between rods that are polished to a brushed finish or a mirror-like finish.
An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
The matte plating on these rods, sometimes called industrial chrome and hard chrome, creates a slippery surface that minimizes galling and prevents parts from seizing.
The outside of these 90° angles is polished to either a brushed finish or a mirror-like finish.
Polished on the outside to a #8 reflective, mirror-like finish, these tubes have no visible grain lines.
A hard-anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
Also known as American Standard I-Beams, these I-beams have rounded corners.
Weld these aluminum triangles to reinforce joints in structural applications.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
An anodized coating on these U-channels forms a bond with the aluminum surface to improve wear and corrosion resistance.
The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance.
The outside of these tubes is anodized to improve wear and corrosion resistance.
6101 aluminum is chiefly used as a lightweight and economical alternative to copper in electrical applications, such as bus bars in switchboards and battery banks.
As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.
Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.
Frequently used to make valve bodies, pistons, and hydraulic parts, 6020 aluminum is easier to machine and more corrosion resistant than 6061, but it is not as weldable.
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.
Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.
Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Originally developed for aircraft frames, uses for 7075 aluminum now include shafts, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Also known as flat stock, these sheets and bars are precision ground on the top and bottom.
These sheets are clad in 1230 aluminum for an added layer of corrosion resistance.
These rods are precision ground and held to a strict straightness tolerance, so they’re ready for turning in a lathe.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.
2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in a lathe.
Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity. It’s comparable to QC-10 aluminum.
Substitute 7050 aluminum for 7075 in structural applications when high stress-corrosion resistance is required. It is the same material that's used for bulkheads and fuselage frames.
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.
This wire has a soft temper and will stay in place when bent.
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
The textured surface on these sheets increases rigidity and hides fingerprints and dents.
One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
A black, gold, or silver anodized finish protects this 5005 aluminum from wear and abrasion.
Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.
Stronger than other marine-grade aluminum, 5456 is often used for pressure vessels and storage tanks in saltwater environments.
MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.
Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.
Lighter in weight than steel and stronger than plastic, these aluminum balls are widely used as bearings and in valves.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
Cut this stock into custom shapes to fit your application.
Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
No need to prepare this material before machining parts in dovetail vises—the dovetails and locating slots are already cut in.
Coat knobs, handles, mirrors, and other objects with a micron-thin, decorative finish. 99.999% or 99.88% elementally pure, these metals vaporize when heated with low-voltage current inside a high-vacuum environment.