We will reply to your message within an hour.
These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.
Connect T‐slotted rails and reinforce joints for structural stability.
Screw and nut sets or nuts secure brackets and other accessories to rails.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Pivots provide smooth motion at the junction between two T-slotted rails.
Add panels to T-slotted framing to create machine guards and strip doors.
Slide drawers, panels, and doors with these tracks and rollers.
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.
Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.
Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.
For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.
Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.
Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.
Control static and ground T-slotted framing structures with these bonding and grounding components.
Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.
Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches, workstations, and stands.
Align and drill accurate holes in T-slotted rails with these reusable templates.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Route wires, cables, and tubing along T‐slotted rails.
Illuminate workstations, enclosures, and machines.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.
To provide corrosion resistance in wet environments, this framing is galvanized.
In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.
Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Clamp panels onto strut channel to hold them in place.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.
Run wires through the hollow stud of these nuts or use them as vents.
Connect two channels to create a stacked channel.
Serrated grooves grip the lip of the channel.
Keep a rod securely centered against the strut channel.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Push these nuts into place rather than threading them onto a fastener.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
Create posts of varying lengths.
Create lightweight adjustable structures. With telescoping aluminum rails, this framing is often used to make folding stands, extension poles, and sign frames.
Thick construction makes this framing strong and sturdy.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.
Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t.
An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
An offset barrel allows you to position threads near edges and corners.
Weld these nuts to stainless steel surfaces.
Projections on the base concentrate the weld and provide room for heat to dissipate.
With a slim base and a short barrel, these weld nuts fit in tight spaces, such as channels, and in low-clearance areas.
Integrate these stroboscopes into fast-moving lines to check quality.