Filter by
System of Measurement
Material
Appearance
Temper Designation
Hardness Rating
Tolerance Rating
Heat Treatment
Fabrication
Yield Strength
Hardness
Export Control Classification Number (ECCN)
Specifications Met
DFARS Specialty Metals
Heat Treatable
REACH
Maximum Temperature
Minimum Temperature
Elongation
About Aluminum
Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
Architectural 6063 Aluminum Bars with Rounded Edges
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Heat Treatment | Temperature Range, °F | Flatness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Thick. (-0.006" to 0.006" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/32" Thick. (-0.006" to 0.006" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/8" Thick. (-0.007" to 0.007" Tolerance) | ||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/16" Thick. (-0.007" to 0.007" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/4" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/8" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 3/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
7/16" Thick. (-0.008" to 0.008" Tolerance) | ||||||
| 7/16" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1/2" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
5/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
3/4" Thick. (-0.01" to 0.01" Tolerance) | ||||||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
1" Thick. (-0.012" to 0.012" Tolerance) | ||||||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | ||
Architectural 6063 Aluminum Bars
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Heat Treatment | Temperature Range, °F | Flatness Tolerance | 4 ft. Lg. | 8 ft. Lg. | 12 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
3/16" Thick. (-0.007" to 0.007" Tolerance) | |||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1/4" Thick. (-0.008" to 0.008" Tolerance) | |||||||
| 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 000000000 | |||
3/8" Thick. (-0.008" to 0.008" Tolerance) | |||||||
| 3/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1/2" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
5/8" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 5/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
3/4" Thick. (-0.009" to 0.009" Tolerance) | |||||||
| 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
7/8" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 7/8" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
1" Thick. (-0.012" to 0.012" Tolerance) | |||||||
| 1" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 1/2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 1 3/4" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||
| 2" | Hardened | -320° to 212° | 0.006" per in. of width | 00000000 | |||