Don't see the shim stock you need? Just tell us what you're looking for and we'll get it for you.
Easy-to-Form Pure 1000 Series Aluminum Sheets and Bars
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.”
For technical drawings and 3-D models, click on a part number.
- Yield Strength: 3,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | |
| 0.0200" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0320" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0400" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0500" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0630" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0800" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0900" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 1/8" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 |
Hardened Easy-to-Form Pure 1100 Aluminum Sheets
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum. Because 1100 aluminum is 99% pure, it offers superior corrosion resistance and electrical conductivity.
Temper H19 foil is often used as EMI/RFI shielding in electronic applications.
Temper H14 sheets are used for heat exchangers, chemical equipment, and decorative trim.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 20,000 psi
- Hardness: Brinell 45 (Soft)
- Temper: H19 (Full Hard)
- Fabrication: Cold Rolled
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
2" × 25 ft. | |||||
|---|---|---|---|---|---|
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
6" × 50 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
6" × 100 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
18" × 50 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
18" × 100 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
- Yield Strength: 15,000 psi
- Hardness: Brinell 30 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 36” | 24” × 48” | 48" × 48" | 48" × 96" | |
| 0.032" | -0.004" to 0.004" | -200° to 300° | 00000000 | ||||||||||
| 0.050" | -0.005" to 0.005" | -200° to 300° | 00000000 | ||||||||||
| 0.063" | -0.005" to 0.005" | -200° to 300° | 00000000 | ||||||||||
| 0.090" | -0.006" to 0.006" | -200° to 300° | 00000000 | ||||||||||
| 1/8" | -0.007" to 0.007" | -200° to 300° | 00000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -200° to 300° | 00000000 | ||||||||||
| 1/4" | -0.016" to 0.016" | -200° to 300° | 00000000 |
Contaminant-Free High-Vacuum Aluminum Foil
- Yield Strength: 14,000 psi
- Hardness: Not Rated
- Temper: O
- Fabrication: Cold Rolled
- Specifications Met: ASTM B479, Fed. Spec. QQ-A-1876
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system. It is “A” wettable, so it's completely free of the oils found on other types aluminum foil. Supplied on a plastic core, it comes wrapped in plastic and packed in a plastic box to ensure it stays free of contaminants. Often called UHV (ultra-high vacuum) foil, it is 1100 aluminum, which is highly corrosion resistant and very formable.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
6" × 250 ft. | |||||
|---|---|---|---|---|---|
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 0000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
6" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
18" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
18" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
Shim Stock Sets
Keep shim stock in a variety of thicknesses on hand with these sets. Cut it into custom shapes to fit your application.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Aluminum shim stock is lightweight and nonmagnetic. It has good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Hardness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | No. of Pieces | Includes | Wd. | Lg. | Min. | Specifications Met | Magnetic Properties | Each | |
Rolls | |||||||||
1100 Aluminum | 4 | One roll each of the following thicknesses: 0.001" (±0.00005"), 0.002" (±0.0001"), 0.003" (±0.00015"), 0.005" (±0.00025") | 6" | 50" | Not Rated | ASTM B209 | Nonmagnetic | 000000 | 000000 |
Adhesive-Back Shim Stock
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application. Shim stock is corrosion resistant. It includes a material certificate with traceable lot number and test report.
Aluminum and brass shim stock are softer than stainless steel, so they can be used as wear plates between components that rub together, preventing damage to equipment. Aluminum shim stock is lighter than brass.
For technical drawings and 3-D models, click on a part number.
Hardness | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Material Thick. | Adhesive Thick. | Adhesive Type | Min. | Temper Rating | Specifications Met | Liner Type | Magnetic Properties | Each | |
1100 Aluminum | |||||||||||
6" × 12" | |||||||||||
| 0.008" | -0.0006" to 0.0006" | 0.006" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 000000 |
| 0.01" | -0.0008" to 0.0008" | 0.008" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.012" | -0.001" to 0.001" | 0.01" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.017" | -0.0015" to 0.0015" | 0.015" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.022" | -0.002" to 0.002" | 0.02" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.034" | -0.002" to 0.002" | 0.032" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.042" | -0.004" to 0.004" | 0.04" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.052" | -0.0045" to 0.0045" | 0.05" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.065" | -0.0045" to 0.0045" | 0.063" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.082" | -0.0045" to 0.0045" | 0.08" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
| 0.092" | -0.0045" to 0.0045" | 0.09" | 0.002" | Acrylic | Not Rated | Softened (Annealed) | ASTM B209 | Paper | Nonmagnetic | 00000000 | 00000 |
Peel-Away Layered Shim Stock
Cut this shim stock it into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Aluminum shim stock is lightweight and nonmagnetic. It has good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | No. of Layers | Min. Hardness | Temper Rating | Specifications Met | Magnetic Properties | Each | |
12" × 12" | ||||||||
|---|---|---|---|---|---|---|---|---|
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.006" | -0.0005" to 0.001" | 3 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 000000 |
| 0.008" | -0.0005" to 0.001" | 4 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.01" | -0.0005" to 0.0015" | 5 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.016" | -0.001" to 0.0015" | 8 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.02" | -0.001" to 0.002" | 10 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.032" | -0.002" to 0.003" | 16 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.048" | -0.002" to 0.005" | 24 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.062" | -0.002" to 0.006" | 31 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.094" | -0.003" to 0.009" | 47 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.125" | -0.003" to 0.012" | 62 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.016" | -0.001" to 0.0015" | 5 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.021" | -0.001" to 0.002" | 7 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.033" | -0.002" to 0.003" | 11 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.048" | -0.002" to 0.005" | 16 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.063" | -0.002" to 0.006" | 21 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.094" | -0.003" to 0.009" | 31 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| 0.125" | -0.003" to 0.012" | 42 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
24" × 24" | ||||||||
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.187" | -0.003" to 0.018" | 62 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 000000 |
| 0.25" | -0.005" to 0.025" | 83 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 000000 |
Color-Coded Shim Stock
This shim stock is color-coded by thickness for easy identification. Cut it into custom shapes to fit your application. Shim stock is corrosion resistant. Sheets come flat packed.
Painted aluminum shim stock is stronger than plastic stock. It includes a material certificate with traceable lot number and test report.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Color | Material | Min. Hardness | Temper Rating | Magnetic Properties | Each | |
Sheet | ||||||||
|---|---|---|---|---|---|---|---|---|
6" Wd. × 24" Lg. | ||||||||
| 0.004" | -0.0004" to 0.0004" | Beige | Painted 1100 Aluminum | Brinell 32 | 1/2 Hard to Full Hard | Nonmagnetic | 0000000 | 00000 |
| 0.01" | -0.001" to 0.001" | Brown | Painted 1100 Aluminum | Brinell 32 | 1/2 Hard to Full Hard | Nonmagnetic | 0000000 | 0000 |
12" Wd. × 24" Lg. | ||||||||
| 0.004" | -0.0004" to 0.0004" | Beige | Painted 1100 Aluminum | Brinell 32 | 1/2 Hard to Full Hard | Nonmagnetic | 0000000 | 00000 |
| 0.01" | -0.001" to 0.001" | Brown | Painted 1100 Aluminum | Brinell 32 | 1/2 Hard to Full Hard | Nonmagnetic | 0000000 | 00000 |
Shim Stock Assortments
Create a custom shim to fit your application. Includes one sheet of each thickness.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Shim Stock Included | Lg. | Wd. | Container Type | Each | |
| 59 | 1010 Low-Carbon Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 1095 Spring Steel—Hardened: 0.005", 0.01", 0.015", 0.02", 0.025", 0.032" 110 Copper—Softened: 0.005", 0.01", 0.015", 0.02", 0.025" 1100 Aluminum—Hardened: 0.001", 0.002", 0.003", 0.005" 18-8 Stainless Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 260 Brass—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 510 Bronze—Spring-Tempered: 0.005", 0.008", 0.01", 0.013", 0.016", 0.02", 0.025", 0.032" | 12" | 6" | Metal Cabinet | 0000000 | 0000000 |
Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
1100 aluminum is about half the weight of steel and resists corrosion in wet environments.