McMaster-Carr logo
    Filter by
    Material
    System of Measurement
    Key Type
    Tolerance Rating
    Length
    Minimum Hardness
    USMCA Qualifying
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    7 Products

    Machine Key Stock

    Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    6061 Aluminum
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    6061 aluminum key stock is one-third the weight of steel key stock, but not as strong. It resists corrosion and is nonmagnetic.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/8" × 1/8"Standard-0.008" to 0.008"-0.008" to 0.008"Not Rated000000000000000
    3/16" × 3/16"Standard-0.008" to 0.008"-0.008" to 0.008"Not Rated00000000000000
    1/4" × 1/4"Standard-0.008" to 0.008"-0.008" to 0.008"Not Rated0000000000000
    5/16" × 5/16"Standard-0.008" to 0.008"-0.008" to 0.008"Not Rated00000000000000
    3/8" × 3/8"Standard-0.008" to 0.008"-0.008" to 0.008"Not Rated0000000000000
    1/2" × 1/2"Standard-0.009" to 0.009"-0.009" to 0.009"Not Rated00000000000000
    5/8" × 5/8"Standard-0.009" to 0.009"-0.009" to 0.009"Not Rated00000000000000
     
    back to top