How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Fire-Fighting Hose Threads
More
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k12-53015k42c1-c01h-digital-master1572989902-p9@halfx_637085756396179244.png?ver=imagenotfound)
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k72_76e70235-0365-4d8e-a693-fca83f209c6f@halfx_638037621836012058.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Coupling Size | Plug OD | Max. Pressure | Each | |
Aluminum | ||||
---|---|---|---|---|
1/2 | 15/16" | 250 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 250 psi @ 72° F | 00000000 | 0000 |
1 | 1 7/16" | 250 psi @ 72° F | 00000000 | 0000 |
1 1/4 | 1 13/16" | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 150 psi @ 72° F | 00000000 | 00000 |
5 | 5 3/4" | 75 psi @ 72° F | 000000000 | 00000 |
6 | 6 15/16" | 75 psi @ 72° F | 00000000 | 00000 |
8 | 8 7/8" | 50 psi @ 72° F | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k183c2-c01h-digital-master1572989860-p9@halfx_637085660504610046.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 000000 | 000000 | 00 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k82p2-c01h-digitall@halfx_637085653434819208.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||
1/2 | 15/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
3/4 | 1 1/4" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 00000 | 5 | 0000000 | 00000 | 000000 | 00 |
6 | 6 15/16" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
8 | 8 7/8" | 4 | Zinc-Plated Steel | 50 psi @ 72° F | 000000000 | 000000 | 1 | 0000000 | 00000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||
1/2 | 15/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 00000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
Metal Cam-and-Groove Hose Couplings for Water
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t42-t12c1-c01h-digital-master1572989813-p9@halfx_637085721788986714.png?ver=imagenotfound)
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t72p1-c01h-digitall@halfx_637085722747168291.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | Max. Pressure | Each | |
Anodized Aluminum | ||||
---|---|---|---|---|
1/2 | 15/16" | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 250 psi @ 72° F | 0000000 | 00000 |
1 1/4 | 1 13/16" | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 250 psi @ 72° F | 0000000 | 00000 |
2 1/2 | 3" | 200 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 200 psi @ 72° F | 0000000 | 00000 |
4 | 4 3/4" | 150 psi @ 72° F | 0000000 | 00000 |
5 | 5 3/4" | 75 psi @ 72° F | 00000000 | 00000 |
6 | 6 15/16" | 75 psi @ 72° F | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t182c2-c01h-digital-master1572989813-p9@halfx_637085769529298257.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Caps | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | ||||||||||
Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | ||||||||||||
1 | 1 7/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 1/2 | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
3 | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t82p2-c01h-digitall@halfx_637085701266295880.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Caps | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | ||||||||||
Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | ||||||||||||
1/2 | 15/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
Quick-Access Caps for Pin-Lug Fire Hydrants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/652/6528t3_16cbfb4c-b96c-4525-8410-ff5d431ef206@halfx_1706629120.png?ver=imagenotfound)
These caps are the fastest way to access fire hydrants and washdown equipment. They have a piece of metal with eyebolts that loop over the pin lugs of the hydrant and are kept in place by nuts. In an emergency/when the hydrant needs to be accessed quickly, the end user can then break the metal (ex. hitting it with a wrench) to access the hydrant port. Caps are aluminum, which is lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Fire Hose Trade Size | Material | Lg. | Each | |
2 1/2 | Aluminum | 3 1/2" | 000000 | 000000 |