We will reply to your message within an hour.
More
These sheets and bars are precision ground either on all six sides or just on the top and bottom.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
The thickness is oversized to allow for finishing to exact requirements.
An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.
These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.
Choose between rods that are polished to a brushed finish or a mirror-like finish.
An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
The matte plating on these rods, sometimes called industrial chrome and hard chrome, creates a slippery surface that minimizes galling and prevents parts from seizing.
A hard-anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
Weld these aluminum triangles to reinforce joints in structural applications.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
Frequently used to make valve bodies, pistons, and hydraulic parts, 6020 aluminum is easier to machine and more corrosion resistant than 6061, but it is not as weldable.
6101 aluminum is chiefly used as a lightweight and economical alternative to copper in electrical applications, such as bus bars in switchboards and battery banks.
As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.
Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.
Originally developed for aircraft frames, uses for 7075 aluminum now include shafts, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Create molds for vacuum-forming and thermoforming applications. Metapor aluminum is porous to let air and moisture escape, which prevents bubbles and blemishes.
Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity. It’s comparable to QC-10 aluminum.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Also known as flat stock, these sheets and bars are precision ground on the top and bottom.
These sheets are clad in 1230 aluminum for an added layer of corrosion resistance.
These rods are precision ground and held to a strict straightness tolerance, so they’re ready for turning in a lathe.
2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in a lathe.
Substitute 7050 aluminum for 7075 in structural applications when high stress-corrosion resistance is required. It is the same material that's used for bulkheads and fuselage frames.
MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.
Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.
The honeycomb design provides a higher strength-to-weight ratio than solid sheets.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
Includes one 1-1/2"×3"×0.032" thick piece of each texture: weave, diamond, and tread.
One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.
A honeycomb core is bonded between two aluminum sheets for rigidity.
The textured surface on these sheets increases rigidity and hides fingerprints and dents.
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
A black, gold, or silver anodized finish protects this 5005 aluminum from wear and abrasion.
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
Stronger than other marine-grade aluminum, 5456 is often used for pressure vessels and storage tanks in saltwater environments.
Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.
Air is injected into the casting of this aluminum to reduce weight and create a crater-like appearance. This foam is often used for sound insulation and architectural facades.
Metal plates are more durable than plastic plates.
Remove the surface layer of these plates to create an engraved message in a contrasting color.
Identify equipment, enclosures, or other areas at a glance.
Use the holes in all four corners to bundle or tie these plates to equipment when bolting isn’t an option.
These plates are thin enough for embossing, which produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.
Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.
Characters are stamped and filled with black enamel, or engraved to reveal a contrasting color.
Specify a starting number. Characters are imprinted and filled with black enamel for contrast.
Specify a starting number. Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.
Track assets with these printed barcode plates.
Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.
Color code equipment and inventory.
These tags have a large hole for easy hanging. Also known as miners' checks.
Metal tags are more durable than plastic tags.
Specify a starting number.
A layer of aluminum foil in these labels will set off metal detectors if they fall into your food-processing line.
For use with Dymo Rhino M1011 embossing label printers.
Write on these labels to mark equipment with a company name and address or ID number.
Metal signs are more durable than plastic signs.
Fill in the blank with your own custom warnings, labels, and messages. You can write on these signs with markers, add color with paint, or stick on adhesive-back characters. Many even work with printers.
Make parking restrictions clear to drivers.
Visually identify a slow-moving vehicle.
Write a message in the blank space below the header using a permanent marker or adhesive-back characters.
Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.
Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.
Grind these hardened steel blanks to the size and shape you need.
No need to prepare this material before machining parts in dovetail vises—the dovetails and locating slots are already cut in.
Close off unused outlets.
Close off unused switches and outlets.
Give switches and outlets a finished look.
These finger blanks come ready to mount to SMC or Schunk grippers, so you can make custom fingers without starting from scratch. Just machine the blank’s gripping end to create fingers that will securely grip your specific parts.
Stamp or emboss these ties to identify material.
These hinges are made of metal.
Choose these hinges for their adherence to strict military standards for material and construction.
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
Springs in these hinges without holes automatically swing doors and gates closed behind you.
A grease fitting makes these hinges easy to lubricate.
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.
Machine your own timing belt pulleys to fit the exact width and shaft diameter needed.