Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Easy-to-Form 6060 Aluminum
- Yield Strength: 21,000 psi
- Hardness: Brinell 65 (Soft)
- Temper: T66
- Fabrication: Extruded
Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries. It’s corrosion resistant as well as easy to machine and weld. It can also be anodized to create a durable, decorative finish.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Height, mm | Height Tolerance Range, mm | Width, mm | Width Tolerance Range, mm | Height, mm | Width, mm | Heat Treatment | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 15 | -0.3 to 0.3 | 10 | -0.25 to 0.25 | 13 | 8 | Hardened | 0.018" per ft. | 0000000 | |||
| 20 | -0.3 to 0.3 | 20 | -0.3 to 0.3 | 18 | 18 | Hardened | 0.018" per ft. | 0000000 | |||
| 25 | -0.5 to 0.5 | 25 | -0.3 to 0.3 | 22 | 22 | Hardened | 0.018" per ft. | 0000000 | |||
| 30 | -0.5 to 0.5 | 15 | -0.3 to 0.3 | 28 | 13 | Hardened | 0.018" per ft. | 0000000 | |||
| 30 | -0.5 to 0.5 | 30 | -0.5 to 0.5 | 25 | 25 | Hardened | 0.018" per ft. | 0000000 | |||
| 30 | -0.5 to 0.5 | 30 | -0.5 to 0.5 | 26 | 26 | Hardened | 0.018" per ft. | 0000000 | |||
| 30 | -0.5 to 0.5 | 30 | -0.5 to 0.5 | 27 | 27 | Hardened | 0.018" per ft. | 0000000 | |||
| 40 | -0.5 to 0.5 | 40 | -0.5 to 0.5 | 35 | 35 | Hardened | 0.018" per ft. | 0000000 | |||
| 50 | -0.5 to 0.5 | 50 | -0.5 to 0.5 | 44 | 44 | Hardened | 0.018" per ft. | 0000000 | |||
Aluminum Quick-Connect Pipe for Compressed Air
- For Use With: Air, Coolant, Nitrogen, Oil
- Maximum Pressure: 230 psi @ 72° F
- Specifications Met: ASTM B241
- Fittings: Use Quick-Disconnect Aluminum
Build a compressed air system in half the time it would take to build a copper or steel system. Also known as Unipipe, this pipe is part of a quick-connect system. The compatible fittings connect to this pipe when you finger tighten their collar and then use a wrench for the final quarter turn. A compression ring and O-ring inside the fitting seal it onto this pipe.
Choose blue or gray pipe for easy identification. Blue pipe is often used for compressed air systems. Gray pipe is often used for vacuum systems.
Use a deburring scraper (sold separately) to smooth rough edges left behind after trimming the pipe to size.
For technical drawings and 3-D models, click on a part number.
| OD | ID | Wall Thick. | Construction | Material | 3 ft. Lg. | 8 ft. Lg. | |
| 3/4" (20 mm) | 0.709" (18 mm) | 0.039" (1 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 | ||
| 1" (25 mm) | 0.898" (22.8 mm) | 0.043" (1.1 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 | ||
| 1 1/2" (40 mm) | 1.472" (37.4 mm) | 0.051" (1.3 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 |
| OD | ID | Wall Thick. | Construction | Material | 3 ft. Lg. | 8 ft. Lg. | |
| 3/4" (20 mm) | 0.709" (18 mm) | 0.039" (1 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 | ||
| 1" (25 mm) | 0.898" (22.8 mm) | 0.043" (1.1 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 | ||
| 1 1/2" (40 mm) | 1.472" (37.4 mm) | 0.051" (1.3 mm) | Seamless | Powder-Coated 6060 Aluminum | 0000000 |
Place the tool over the end of your tube and twist to deburr.
| For Tube OD | Blade Material | Overall Lg. | Body Material | For Use On | Each | |
For Deburring Outer Tube Edges and Inner Tube Edges | ||||||
|---|---|---|---|---|---|---|
| 3/16"-1 1/2" | Steel | 2 1/4" | Zinc | Aluminum, Copper, Brass, Plastic | 0000000 | 000000 |