Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.

Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.

Compatible with ARO-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Compatible with Schrader-shape plugs and sockets.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Compatible with Lincoln-shape plugs and sockets.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.

Made of stainless steel, these hose fittings are more durable than plastic barbed hose fittings and have excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Each of these metal fittings is double bagged to prevent contamination in areas that require a high level of cleanliness.

Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

These nuts attach to high-pressure nipples for compressed gas so you can connect your tank to the inlet of a pressure regulator.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.

Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

Protect your hose when it's not in use.

The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.

Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.

When your process requires hot water, reach for this rubber hose.

Hose is designed to ensure water keeps flowing even if the hose kinks.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

Lightweight yet tough, this hose has an abrasion-resistant polyester cover.

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Adjust the flow while dispensing liquid chemicals.

Nozzles allow you to control the flow while dispensing hydraulic fluid.

Turn the hand crank to rewind your hose.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Barbs grip onto tubing.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

Made of brass, these fittings have good corrosion resistance.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.

These brass couplings have good corrosion resistance.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Fittings can withstand temperatures up to 200° F.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.

These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

Fittings have a barb that grips onto tubing. Use in applications up to 150 psi.

Also known as I-line fittings, these fittings have a male adapter that interlocks with a female adapter for more support than standard quick-clamp fittings.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

The external hex bolt on these fittings allows for easy installation in cramped spaces. They are also known as banjo-style fittings and JIC (Joint Industrial Council) fittings. They provide a tight seal on tubing that is flared to 37°.

These manifolds have two separate sections inside, so you can run two different substances through them without worrying about them intermixing. Also known as headers.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air or fluid to flow straight through the block.

Build a compressed air system in half the time it would take to build a copper or steel system.