Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

These short sockets fit spaces where height clearance is limited.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

With more than double the clearance of standard sockets, these sockets access nuts on extra-long bolts.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Turn multiple shapes and sizes of fasteners with a single socket.

Attach one of these heads to your square-drive ratchet or torque wrench to extend its reach or to access spaces with limited vertical clearance.

Designed to fit inside strut channel, these sockets make it easier to mount the channel than using an extension or additional tools.

Pivot the head to access fasteners from an angle.

The short bit on these sockets fits in spaces where height clearance is limited.

Switch out worn or damaged bits instead of replacing your entire bit socket.

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Pivot the head to access fasteners from an angle.

Attach these sockets to your spline-drive impact wrench.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

Extra-long bits allow access to hard-to-reach fasteners.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

With more than double the clearance of standard sockets, the sockets in these sets access nuts on extra-long bolts.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These sets organize what you need when working around live electrical circuits.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.

Grip more of your fastener head with these wrench heads.

Extra-long bits help you access hard-to-reach fasteners.

Convert your standard 6-point sockets into hex bit sockets with these bits.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

The rail is smooth plastic so the clips move more easily than on steel-rail organizers.

Move the sliding clips to any position along the rail to hold a variety of sockets.

Magnets hold sockets securely in place.

Made of stainless steel, these wrenches have excellent corrosion resistance.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Fit the narrow head into tight spaces and around thin fasteners.

One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These lightweight tools are also known as AN (Army-Navy) wrenches.

These are also known as tappet wrenches.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.

Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The offset head gives you additional clearance to turn hard-to-reach fasteners.

The heads are angled to provide clearance around obstructions.

Also known as half-moon and obstruction wrenches, the shape lets you reach around obstacles and into machinery.

Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.

The head is offset 45° to provide clearance for reaching over obstructions.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.