Set these lasers on any surface, and they'll level themselves within about 4°. Whether you’re hanging a drop ceiling or aligning bench tops, they project accurate level references to make sure your installation will be at the right height. You can also mount them in a few different ways. They have a threaded insert to attach to a tripod (sold separately). Or use the magnetic base, which is strong enough to hold even on vibrating equipment.

Red lasers are best for indoor environments, since they’re dimmer than green lasers. Green lasers appear up to 10 times brighter than red lasers, making them easier to see outdoors or in bright indoor lighting, as well as from far away.

Lasers with 5 dots help you verify your installation is straight, level, and plumb at the same time. This prevents you from having to reposition the level frequently, so you can work faster.

Lasers with a strap mount can be secures on poles and ladders.

Project two intersecting lines to ensure equipment is level and plumb. Set these leveling lasers on any surface and they'll level themselves within about 4°. They’re often used to align bench tops in shops and labs.

Red lasers are dimmer than green lasers, so they’re best viewed indoors. Green lasers appear up to 10 times brighter than red lasers, so they can be used from farther distances and in brightly lit areas, including outdoors. Use the included magnetic target to make your laser beam easier to see from a distance.

Lasers with a strap or magnetic base can be affixed to flat surfaces when mounting holes are not available. Add a tripod to adjust the height of these lasers between 16" and 51".

Level equipment with confidence—in addition to a crosshair, these lasers also project plumb dots, so you know the laser is in the right spot. They’re an upgrade from a standard crosshair laser while remaining simpler than lasers with multiple crosshairs. Use these lasers to precisely install square elements, such as doors and windows. The crosshair extends along your wall, so you don’t have to reposition the laser often as you work around your room. If you set them on a surface, these lasers level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.

Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.

Levels with two laser dots help you verify your installation is plumb with reference points above and below the tool. These red lasers are best for indoor environments, since they’re dimmer than green lasers.

Levels with five laser dots help you verify that your tool is positioned correctly in multiple dimensions with reference points above, below, behind, and to the sides of the tool without repositioning your laser. These green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.

Twist the head to switch between a dot, a horizontal line, or a vertical line. These lasers project accurate level references onto walls, ceilings, and equipment. The laser is red and is best viewed indoors.

When a single point of reference is enough, use a dot. Lines give you an extended reference, so you can level several objects without moving the laser. For stability, mount these lasers to a tripod (sold separately), or attach the magnetic base to a metal surface.

Lasers with straps can also be secured to nonmagnetic surfaces.

Project accurate level references onto walls and ceilings to hang light fixtures or install pipe. These lasers have four vials to verify the level, plumb, and square reference points are accurate. Because they’re red, the lasers are best viewed indoors. They have a screw-on mount to secure to a tripod, or you can use the magnetic base to stick them to equipment for quick checks. A V-groove on the body creates stability on curved surfaces, such as pipe or conduit. They’re powered by disposable batteries, so they’re portable and easy to use when you’re not near an outlet.

Verify your installation is level using a single reference point. These green lasers appear up to 10 times brighter than red lasers for visibility from farther away and in brightly lit areas, including outdoors. Five bubble vials confirm level, plumb, and a specific angle. One vial is a pitch gauge, which shows slope in 1/8" increments to help check drainage. For quick and easy mounting, these levels have a magnetic base. It's strong enough to hold even on vibrating equipment.

Stick these levels to most metal surfaces to mark a dot up to 500 feet across your plant. They’re often used for long range applications, such as laying out conveyors and aligning ventilation systems. The single laser dot gives you a simple check that your installation is level against one reference point. These levels are compact, portable, and have a long battery life. Mount them to rotating equipment without worrying about power cords.

Red lasers are dimmer than green lasers, so they’re best viewed indoors. Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.

Use a leveling plate for mounting the laser to a tripod, or placing it on a surface. The plate has three adjustable legs to level the laser.

90° beam splitters convert one dot into two dots set at a 90° angle.

Dot-to-line converters change the dot into a vertical or horizontal line.