We will reply to your message within an hour.
More
Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.
No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.
Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.
Transfer and spray water at low pressure. This hose comes with brass fittings, which are softer than stainless steel fittings for easier threading.
Made of high-purity PVC with 316 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.
Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.
Lighter than standard EPDM water hose, this PVC/Buna-N hose connects to a male threaded fitting on one end and a female one on the other.
Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.
Because the white cover on this hose makes dirt and other contaminants easy to spot, it is often used as a washdown hose in creamery and paper-mill applications.
Transfer and spray water at low pressures.
Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.
Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.
Protect your hose when it's not in use.
Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.
The steel wire reinforcement gives this hose extra strength in high-pressure conditions.
Power away dirt with this heavy duty rubber hose that's also known as pressure-washer hose.
The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.
Reels are enclosed to protect your hose when it's not in use.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Certified to meet NSF/ANSI 61, this discharge hose is safe for use with drinking water. It lays flat when not in use, so you can roll it up for easy transport and storage.
Attach barbed fittings to this hose for use in low-pressure air applications.
Designed for areas where space is limited, these reels have the smallest overall size of all our reels.
Hose is PVC, so it’s lighter and less cumbersome than rubber hose.
Protect your hose when it’s not in use.
Turn the handle to rewind the hose.
Identify your air lines by color.
An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.
Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.
The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.
Made of PVC, this hose stays flexible in temperatures as low as -65° F.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Create a retracting air line that meets your needs.
Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.
Supply air to two power tools without worrying about your lines getting tangled.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.
A female fitting on one end swivels until tightened, making it easy to install without rotating the entire hose.
Use this neoprene hose in temperatures up to 210° F.
Hose is PVC, so it’s light and easy to handle.
Made of polyurethane, this hose stands up to the wear and tear of daily use.
Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
Commonly used to transfer gasoline, this hose is also known as curb pump hose.
Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi. Hose is not for use with gasoline.
Transfer fuel oil with a hose that stays flexible in subzero conditions.
This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.
Transfer industrial gases in temperatures up to 1500° F with this hose.
Change the fuel source for your propane torch from a fuel cylinder to a propane tank. This hose is often used for extended-use applications, or when a propane tank can’t be moved.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Instead of a rubber cover, this hose has a stainless steel braid for excellent strength in high-pressure applications.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Hose has good oil-resistance, so it won’t deteriorate or become brittle when exposed to grease and lubricants.
Also known as pin-rack hose, this hose can be folded to fit in a rack.
Differentiate your hose by color. The abrasion-resistant polyester cover on this hose comes in red, white, or yellow.
Two heavy duty polyester covers protect this hose.
Lightweight yet tough, this hose has an abrasion-resistant polyester cover.
This assembly converts a propane torch (which normally connects to a fuel cylinder) to be used with a propane tank.
Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.