Portable Multi-Gas Detectors
![](/prerenderstable/mvPRE/contents/gfx/imagecache/189/18995t57@halfx_637165987013744023.png?ver=imagenotfound)
When this detector senses high levels of combustible and toxic gases, it alerts you with an audible alarm, warning light, and vibrating alarm. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
Detects (Measuring Range) | Volume | Temperature Range, °F | Batteries Included | Environmental Rating | Each | |
Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (0-100% LEL), Oxygen (0-30% Vol.), Carbon Monoxide (0-1,999 ppm), Hydrogen Sulfide (0-200 ppm) | 95 dBA @ 30 cm. | -40° to 140° | Yes | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA IP68 | 00000000 | 000000000 |
Portable Multi-Gas Detectors with Probe
![](/prerenderstable/mvPRE/contents/gfx/imagecache/189/18995t43p1-i01b-digital@halfx_637068167032923576.png?ver=imagenotfound)
Use the probe to test the air in a hazardous area before entering. Great for confined spaces. This detector alerts you with an audible alarm, warning light, and vibrating alarm in the presence of combustible and toxic gases. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
Detects (Measuring Range) | Volume | Temperature Range, °F | Batteries Included | Includes | Tube Lg., ft. | Environmental Rating | Each | |
Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (0-100% LEL), Oxygen (0-30% Vol.), Carbon Monoxide (0-1,999 ppm), Hydrogen Sulfide (0-200 ppm) | 95 dBA @ 30 cm. | -40° to 140° | Yes | Sampling Probe, Tubing Assembly, Rechargeable Lithium Ion Battery for Probe | 25 | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA IP68 | 00000000 | 000000000 |
Carbon Dioxide Meters
![](/prerenderstable/mvPRE/contents/gfx/imagecache/390/39035k691-@halfx_637771376567410844.png?ver=imagenotfound)
Measure and display real-time indoor ventilation quality. These meters operate with the included universal AC adapter or six AAA batteries. They have automatic baseline calibration. Transfer and view data on your computer using their USB cable and software.
Measuring Range, ppm | Temperature Range, ° F | Mount Type | Ht. | Wd. | Dp. | Power Source | Batteries Included | Number of Batteries Required | Battery Size | Electrical Connection | Voltage | Cord Lg., ft. | Each | |
0-9,999 | 32° to 122° | Portable | 8 1/4" | 2 1/2" | 1 1/2" | Battery, Electric | Yes | 6 | AAA | Plug In | 240V AC | 3 | 000000000 | 0000000 |
Oxygen Detectors
![](/prerenderstable/mvPRE/contents/gfx/imagecache/189/18995t81p1-i01b-digital@halfx_637068166597062184.png?ver=imagenotfound)
When your work area has too much or too little oxygen, these detectors alert you with an audible alarm, warning light, and vibrating alarm. You can adjust the high and low alarm trigger points to suit your environment.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check can be performed with the press of a button.
The detector with a nonreplaceable battery should be thrown away at the end of its two-year lifespan.
Measuring Range, % Vol. | Volume | Ht. | Wd. | Dp. | Temperature Range, °F | Batteries Included | Battery Chemistry | Environmental Rating | Each | |
Detectors with Nonreplaceable Battery | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0-25 | 95 dBA @ 30 cm. | 3 1/2" | 2" | 1" | -4° to 122° | Yes | Lithium | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Group G NEC Zone 0 Groups IIC, IIB, IIA IEC Zone 1 Groups IIC, IIB, IIA IP67 | 00000000 | 0000000 |
Detectors with Replaceable Battery | ||||||||||
0-25 | 95 dBA @ 30 cm. | 3 1/2" | 2" | 1" | -4° to 122° | Yes | Lithium | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Group G NEC Zone 0 Groups IIC, IIB, IIA IEC Zone 0 Groups IIC, IIB, IIA | 00000000 | 000000 |
Batteries (Pkg. of 1) | 0000000 | Pkg. | 000000 |
Air Particle Counters
![](/prerenderstable/mvPRE/contents/gfx/imagecache/575/5750n11-@halfx_637449999714696245.png?ver=imagenotfound)
Check your indoor air quality (IAQ) by measuring the amount of particles present. These counters are often used to monitor dust levels in workshops, check for particles in classrooms, and measure filter efficiency in HVAC systems. The sensor probe detects and identifies particles of six different sizes, helping you confirm that your clean room complies with ISO Class requirements. First, use the zero count filter to establish a baseline before taking a sample. Then, either measure the amount of air particles detected within a set time range or the amount of air particles detected within a certain air volume. Counters store up to 10,000 readings in their internal memory, and you can transfer data to your computer via Ethernet or USB connection—no special software required. Compact, lightweight, and battery powered, these counters are portable and able to operate in tight spaces. They’re CE marked as compliant with European health, safety, and environmental standards.
Battery | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Measures | Measurement Precision | Flow Rate, cfm | Temperature Range, °F | Features | Includes | Specifications Met | Life, hrs. | Charger Included | Batteries Included | Each | |
Air Particles By Volume, Air Particles Over Time | 0.3 microns 0.5 microns 1 micron 2 microns 5 microns 10 microns | 0.1 | 50° to 100° | Backlit Display Isokinetic Sensor Probe Memory Storage | Carrying Case Ethernet Cable Filter Adapter Protective Cap USB Cable Zero Count Filter | CE Marked, ISO 21501, JIS B 9921 | 10 | Yes | Yes | 0000000 | 000000000 |
Environmental-Monitoring Modules for Development Boards
Keep equipment running and working conditions safe—these modules add air quality tracker capabilities to your development board. Each module gathers data on air conditions, ranging from temperature and humidity to carbon dioxide or volatile organic compound (VOC) levels. These modules easily connect to boards and other components with Qwiic cords or by soldering.
Modules with an air quality sensor identify spikes in VOC levels to track air quality changes. Instead of directly measuring VOCs, they measure how much the VOC level has changed in the last 24 hours.
Modules with a temperature, humidity, air quality, and barometer sensor give you the most comprehensive picture of air conditions in your facility. They directly measure the amount of VOCs and give you an estimated measurement of carbon dioxide based on VOC levels. They monitor air quality using Germany’s Air Quality Index (AQI).
![](/prerenderstable/mvPRE/contents/gfx/imagecache/712/7126n13-@halfx_mn9ir_1718219476.png?ver=imagenotfound)
Measures | Relative Volatile Organic Compound Index | Input Voltage | I2C Address | No. of Qwiic Connections | Lg. | Wd. | Each | |
Relative Volatile Organic Compound Concentration | 0-500 | 1.7-3.6V DC | 0x59 | 2 | 1" | 1" | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/712/7126n14-@halfx_66c3l_1718220003.png?ver=imagenotfound)
Measures | Temp. Range, °C | Relative Humidity | Equivalent Carbon Dioxide Concentration | Total Volatile Organic Compound | Barometric Pressure | Input Voltage | I2C Address | No. of Qwiic Connections | Lg. | Wd. | Each | |
Temperature, Relative Humidity, Equivalent Carbon Dioxide, Total Volatile Organic Compound Concentration, Air Quality Index, Barometric Pressure | 0° to 65° | 20%-80% | 400-650,000 ppm | 0-65,000 ppb | 8.9-32.5 in. of Hg | 1.2-3.6V DC | 0x52, 0x53, 0x76, 0x77 | 2 | 1" | 1" | 0000000 | 000000 |