We will reply to your message within an hour.
These blowguns have a metal body.
The lightweight plastic construction makes these blowguns more comfortable to hold than metal.
The rubber tip won't damage parts.
Designed to reduce noise, these blowguns are quieter than similar standard guns.
Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.
Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.
Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.
Connect the included hose to your air supply and these blowguns are ready to use.
The extra length lets you access hard-to-reach areas.
The included hose is ready to connect to your air supply.
The lightweight plastic body is more comfortable to hold than metal.
These guns include a rubber tip that won't damage your workpiece.
Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.
Increase your reach with the telescoping nozzle.
Maximize comfort and minimize strain with these lightweight guns.
These blowguns provide more than two times the airflow of standard guns.
Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.
The flat nozzle distributes air over a wide area.
Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.
The most powerful blowguns we sell, these use compressed air to clean and blow debris.
Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.
Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.
A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.
These tubular holders have open ends. Slide a blowgun inside for storage.
Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.
Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.
These guns provide more than three times the airflow of standard static-eliminating blowguns.
Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).
Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Made from rubber, these nozzles won’t scratch or damage sensitive workpieces.
These premium nozzles are engineered for the most efficient airflow consumption.
Control consumption and noise by adjusting the airflow.
Attach to your blowgun to direct airflow.
Extend these telescoping nozzles to increase your reach.
The extra length allows access into hard-to-reach areas.
Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.
These nozzles are made of FDA-listed materials.
At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.
Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.
Adjust airflow to control consumption and noise.
The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.
Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
These needle-style nozzles force air to a precise pinpoint.
As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.
Focus air with pinpoint precision.
Choose a base, hose, and nozzle for a custom setup.
The magnetic base mounts to your work surface and has a control valve for adjusting airflow.
Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.
Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.
Often used for simultaneously spot cooling and blowing parts, these nozzles cool compressed air without electricity or refrigerants.
Blow debris and sweep it away with the built-in brush.
Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.
Turn your blowgun into a scraper to remove and blow away debris at the same time.
Launch foam cylinders through hose and tubing to power away dirt and deposits. Unlike cleaners with brushes, these work on flexible, curved, and coiled tubing as well as those with fittings, valves, and 90° bends.
Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.
Clean without the hassle of a cord.
The flexible hose provides access to blind holes in tanks, bins, and barrels.
These vacuum cleaners work well for cleaning machinery and workstations.
These vacuum cleaners are grounded and prevent buildup from electrostatic discharge that can damage sensitive electronic equipment.
Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.
This vacuum/blower is the most powerful hand-held option for dry pickup.
This vacuum/blower is for light cleaning and has a capacity of a 1/2 quart.
Capacity is 1 quart.